Eltako MTR12-8.230VUC Engine Cut-Off Relay

• Single Handle Tub and Shower
• Open beak
• Chromed brass, cartridge 35 mm
• Stylish design

Eltako Motor isolating relay, 2 + 2 NO not floating 5A/250V AC for one or two 230 Volts motors. Standby loss 0.5 watt only. Modular device for DIN rail mounting DIN-EN 60715 TH35. 1 module = 18mm wide, 58mm deep. Universal control voltage 8..230 Volts UC. Supply voltage 230 Volts. The tubular motors of shading elements and roller shutters must not be connected in parallel, as will occur through the limit switches to reverse voltages and ultimately destroy the motors. For a motor and if the control voltage and the motor voltage is 230 Volts, an EGS12Z is enough. Where more than one motor is controlled by an EGS12Z or if the control voltage is different, for every two motors, it must be connected to one MTR12. The MTR12 can be operated in parallel, require unassigned contact outputs K2/K3 of the controlling EGS12Z. These are connected to terminals K2/K3 of the MTR12. 1/2 = motor 1, 3/4 = motor 2. The functions UP 'or' Down 'can be locked with a rotary switch and can be switched off completely. This block applies only to the maximum 2 connected motors. Therefore single shading elements or roller shutters can be excepted from the automatic function of overall control in whole or in part.