Redunest 30 Pack Matte Black Stainless Steel Modern Square Cabinet Handles with T Bar, 2 Inch Hole Centers for Drawers, Cupboards, Wardrobes

• HOLE CENTERS: single hole centers, hole centers of 5.1 cm (2 inches), please measure your cabinet hole centers carefully and then decide which size you need
• Total length: 50 mm; height: 33 mm
• MATERIAL: Black cabinet handles made of stainless steel, hollow but sturdy and beautiful for your needs
• EXTREMELY REASONABLE PRICE: our cabinet handles and cabinet knobs are much lower than your local depot but of good quality, very affordable
• PACKAGE INCLUDES - 30 pack black handles with matching standard screws. You can select the right size according to the thickness of the cabinet. Each handle is individually wrapped and packaged to protect the beautiful color

Good quality and will not fade. Forms a complete screw, convenient to use. Pleasant to the touch. Very useful for pulling out drawers, cabinets and other furniture. Style: modern American, stainless steel, simple and elegant design, not easy to fade. Note: If you need specific length screws, please leave a message in the order. Step 1: The hole spacing of the handles of different sizes is different, so it is necessary to use adhesive tape. measure to determine the spacing of the holes between the handles, which must be accurate, because it is necessary to determine the drilling position of the screw holes on the cabinet door. Step 2: First, determine the installation position of the cabinet door, which depends on the cabinet. the door, as well as the height of the cabinet and the position of the cabinet door. Generally, it is the best condition to take as your preferred condition, then directly Compare the distance between the handle holes just measured vertically on the cabinet door plate, then mark the position of the hole with a marker Step 3: Select a drill of suitable size. Generally, the handle is a small hole position, then Use an electric drill to drill vertically at the marked position Step 4: Hold the cabinet door handle with your left hand, align the handle with the hole just right Drill a hole, then pass the small screw through the hole at the back of the cabinet door. and tighten the screw with a screwdriver after alignment.