Redunest 50 Pack Matte Black Stainless Steel Square Cabinet Handles 224mm Hole Centres

• Hole Centers: 224mm hole centers, please measure your cabinet hole centers carefully and then decide what size you need
• Dimensions: total length 236 mm, width 12 mm, height 35 mm
• Material: black stainless steel cabinet handles, hollow but strong and beautiful for your needs
• EXTREMELY REASONABLE PRICE: our handles are much lower than your local hardware store but of good quality, very affordable
• Package Contents: 50 Black Cabinet Handles, 100 Long Screws, 100 Short Screws. You can select the right size according to the thickness of the cabinet. Each handle is individually wrapped and packaged to protect the beautiful color

Good quality and will not fade. Forms a complete screw, convenient to use. Pleasant to the touch. Very useful for pulling out drawers, cabinets and other furniture. Style: modern American, stainless steel, simple and elegant design, not easy to fade. Note: If you need specific length screws, please leave a message in the order. Step 1: The hole spacing of handles of different sizes is different, so it is necessary to use adhesive tape. measure to determine the spacing of the holes between the handles, which must be accurate, because it is necessary to determine the drilling position of the screw holes on the cabinet door. Step 2: First, determine the installation position of the cabinet door, which depends on the cabinet. the door, as well as the height of the cabinet and the position of the cabinet door. Generally, it is the best condition to take as your preferred condition, then directly Compare the distance between the holes of the handle just measured vertically on the cabinet door plate, then mark the position of the hole with a marker Step 3: Select a drill of suitable size. Generally, the handle is a small hole position, then Use an electric drill to drill vertically at the marked position Step 4: Hold the cabinet door handle with your left hand, align the handle with the hole exactly Drill a hole, then pass the small screw through the hole at the back of the cabinet door. and tighten the screw with a screwdriver after alignment.