TOPWAY Tile Leveling System 200pcs Pack Reusable Tile Levelers Spacers for Building Walls Floors + Special Wrench 347835

• 【Application and Use】 Designed to be used as a leveler, 1.5mm cross spacer and standard spacer 1.5mm, 2mm, 2.5mm and 3mm
• 【High quality and durable】 Made of semi-crystalline thermoplastic with high impact resistance, and the steel part is made of stainless steel with a thickness of 1.4 mm, which allows you to use them with plastic spacers from 1.5 mm to 2.5 mm
• 【Reusable and durable】Save a lot of money by using them over and over again; After laying the tiles, just turn the screws counterclockwise and remove the main anchor, you may need to hammer it gently
• 【Simple & Easy to Use】 Unlike normal leveling shims and pliers, this new system does not require any tools unless you need to tighten very hard, and the special wrench is included. It is quite easy to fix or remove with the wrench to improve the installation speed of the tiles.
• Suitability: Suitable for tiles from 3 mm to 16 mm thick, but can be used with tiles up to 18 mm thick

Specifications: Material: PP + stainless steel Color: Black + Orange Suitable Spacers: 2~6mm Suitable for tile thickness: 3~16mm Quantity:~200pcs Package includes: 200 x Plate Positioning Levels (Approx.) 1 x Wrench Instructions: 1. When laying and sticking tiles, the brick seam should be kept at 2-6 mm 2. Set the thickness of the plate the controller will be inserted, insert T type metal needles along the brick joints, and then rotate 180° to lock it at the bottom of the two bricks 3 Squeeze the adjustment cap downwards by hand or with the special wrench to make the level of the two bricks consistent 4 After the construction, five hours later, when the cement or tile glue is not completely dry, you can loosen the adjustment cap in the opposite direction, 180° rotate again, let the T-needle along the crack out 5 Before tightening, it is recommended to rotate the T pin left and right several times to make room for the surrounding cement or tile adhesive so that the controller can be more easily removed