TA-VIGOR M1-M10 Adjustable Tap Wrench Handle for Metric M1-M10 1/16-3/8 (UNC/UNF) Taps, Tap Reamer Tapping Hand Tool for Machinist Repair

• 【Tap Wrench】:Fit tap size: M1-M10/ 1/16" - 3/8" (UNC/UNF) / 1.5mm-10mm (the size range is the size of the adaptable taps, not the actual adaptable size), suitable for tap shank diameter up to 8mm, offering high hardness and wear resistance for long service life.
• 【High Quality Tap Reamer】: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
• 【Easy To Use】: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
• 【Tips】: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other. To smooth operation, clean and re-oil threads and slider before use.
• 【Widely Applications】: Hand tap holder can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping.

Description: 1. The adjustable tap wrench clamp the tool easily and firmly. 2. Straight shank design provides greater leverage. 3. Tap tool wrench used to fix larger taps and provide open space for rotating the tap wrench. Applications: The tap wrench is specially designed for use with taps, reamers, drills, screw extractors and other small hand-turned tools. It is very convenient for hand operation and can improve work efficiency. It is good for DIY tapping. Taps of any size can be clamped within the clamping range. Widely used in industry (mold), and home (furniture, home appliance). Important Tips: -At the beginning of tapping, try to position the tap as much as possible , then apply pressure to the tap and turn the tap wrench. When tapping 1-2 turns, carefully check and correct the position of the tap. Generally, the tap position should be correct when tapping 3-4 turns of thread. Then only need to rotate the wrench, and no more pressure on the tap, otherwise the thread profile will be damaged. -When tapping the screw holes of plastic materials, add lubricating coolant. For steel materials, engine oil or emulsion with higher concentration is generally used. If there is higher demand, rapeseed oil or molybdenum disulfide can be used. For stainless steel, 30# engine oil or sulfurized oil can be used.