Terrax by Ruko Threading Die DIN 22568 Polished M14

• Completely in high-alloyed tool high-speed steel.
• For metric thread M 14 x 2.0 mm according to DIN ISO 13
• The thread can be cut in one motion.
• To cut a male thread, the material being cut must already have a nominal diameter of the desired thread.
• The thread cutter is used and turned until the desired thread length is achieved.

Dies of quality high-speed steel. For metric male thread (DIN ISO 13). This robust tool is suitable for all common industrial materials, such as: Unalloyed and low-alloyed steels up to 800 N/mm² strength, malleable iron and non-ferrous metals. Bolt diameter 13.82mm To cut an external thread, the workpiece must already have a nominal diameter of the desired thread. The workpiece should be clamped into a vice with the side to be cut facing up. The die is applied and rotated until the desired length of the thread is reached. It is recommended that the die be reversed slightly every now and again so that the chips break, fall out and do not clog up the threads. Lubrication with cutting oil is recommended. This reduces the effort and increases the service life (durability) of the die. Features: Type: Form B closed, pre-slit Thread: M 14 metric DIN ISO 13 Thread pitch: 2.00mm Tolerance: ISO 6 grams Surface: blank Right-hand cutting Outer diameter: 38.0mm Thickness: 14.0mm