Eltako switching power supply 12 V/12 W, 1 piece, FSNT14-12 V/12 W

• Switching power supply 12V/12W.
• DC power supply
• 2. Output voltage
• Rated supply voltage at AC 50 Hz
• Power supply

Switching power supply. Stand-by loss only 0.2 watts. If the total power requirement of a series14 bus system is higher than 12W, additional switch PSUs FSNT14-12V/12W are required. These must not be switched in parallel, but supply a group of actuators, which are separated with a separating bridge on the FSNT14. Box contents include 1 dividing bridge TB14 1 TE, 1 bridge 1.5 TE and a spacer DS14. With a load greater than 50% of the rated power and always with adjacent switching power supplies and dimmers, a 1/2 division unit ventilation distance with the spacer DS14 is required. This and a long jumper are included. Input voltage: 230 V (-20 % to +10 %). Efficiency: 83%. Stabilised output voltage ±1%, low ripple. Short circuit proof Overload and overtemperature protection by switching off with automatic switch-on after the fault removal (autorecovery function).