32A 5 Pin to 32A 4 Pin 415V 5M 3 Phase Industrial Adaptor Lead – 3P+N+E to 3P+E, SY Steel Wire Braided Cable, CE Marked IEC 60309 Connectors, IP44, (5 Metre)

• 32A 5 Pin to 32A 4 Pin Adaptor – Connects a 415V 3-phase 32A 5-pin 3P+N+E supply to equipment fitted with a 32A 4-pin 3P+E plug. The neutral conductor is not carried through to the output.
• Heavy-Duty SY Braided Cable – Manufactured using flexible SY cable with a visible steel wire braid for additional mechanical protection against abrasion, impact and everyday industrial handling.
• CE Marked Industrial Connectors – Fitted with robust red IEC 60309 plug and socket connectors featuring solid brass contacts, impact-resistant bodies, secure cable glands and an IP44 splash-resistant rating.
• Individually Inspected and Electrically Safety Tested – Every adaptor is checked before dispatch, including earth continuity, insulation resistance and polarity/conductor arrangement where applicable.
• Up to Approximately 23kW Three-Phase Capacity – At 415V and 32A, the theoretical maximum output is approximately 23kW at unity power factor. Actual connected load must remain within the upstream supply, protective device and equipment ratings.

32A 5 Pin to 32A 4 Pin 415V Three-Phase Industrial Adaptor Lead This heavy-duty industrial adaptor allows equipment fitted with a 32A 4-pin 3P+E plug to connect to a compatible 32A 5-pin 3P+N+E three-phase supply. The three phase conductors and protective earth are carried through to the 4-pin output, while the neutral conductor from the 5-pin supply is not connected. It is therefore suitable only for 415V three-phase equipment that does not require a neutral connection. Manufactured using durable SY steel wire braided cable and fitted with CE marked IEC 60309 industrial connectors, the adaptor is suitable for workshops, manufacturing equipment, generators, machinery, welding equipment, events and temporary industrial power distribution. 32A 5-pin 3P+N+E red plug. 32A 4-pin 3P+E red socket. 415V three-phase connection. SY steel wire braided cable. CE marked IEC 60309 industrial connectors. Solid brass connector contacts. IP44 splash-resistant connector construction. Approximately 23kW theoretical maximum at 415V and 32A. Individually inspected and electrically safety tested before dispatch. Important: This adaptor does not convert voltage, phase arrangement or available current. It does not provide a neutral connection at the 4-pin output and must not be used with equipment that requires a neutral conductor. The connected load must remain within the upstream supply, protective device, cable and equipment ratings. Industrial electrical equipment should only be connected and used by competent persons. The installation must be protected by appropriately rated circuit protection and suitable RCD protection where required. Part of the ElectraLead Industrial Power Range ElectraLead assembles industrial power leads, adaptors and MCB distribution units in-house using IEC 60309 components and suitable heavy-duty cable. A range of amperages, cable lengths and connector configurations is available across the ElectraLead range.