Fixxall All Surface Repair Kit – Wood, Stone & Tile Repairs - Scratch Cover + Repair Filler for Worktops & Floors – Covers Scratches, Scuffs & Small Chips – Quick, Easy DIY (Medium Grey)

• All-in-One Surface Touch-Up Kit – Repair filler + scratch cover finish to restore the look of scratched, scuffed and chipped areas fast.
• Works on Wood & Stone Surfaces – Ideal for sealed wood, laminate and veneer, plus quartz, granite, marble, slate, ceramic and porcelain tiles.
• Fix Scratches, Scuffs & Small Chips – Fills shallow damage, levels the surface and blends the repair for a cleaner, more even finish.
• Perfect for Worktops, Floors & Tiles – Great for kitchens, hallways and high-use areas; quick cosmetic repairs without replacing panels or tiles.
• Professional-Looking Finish – Helps disguise marks and worn patches with a natural-looking blend that improves the overall appearance.
• Multi-Use Home Essential – Keep on hand for quick touch-ups on furniture, counters, splashbacks, hearths and stone-effect surfaces.
• Easy Step-by-Step DIY Application – Clean → fill → smooth → apply scratch cover → blend; build in thin layers for best results.

Restore tired-looking surfaces fast with the Fixxall Surface Repair Kit. Designed to tackle everyday scratches, scuffs and small chips, this all-in-one kit uses a high-build repair filler to level damaged areas, then a scratch cover finish to blend and improve the final appearance—ideal for quick, professional-looking DIY touch-ups. What this kit is for Light–moderate scratches & scuffs Small chips and shallow surface damage Worn, dull patches and cosmetic marks Touch-ups on high-traffic, high-use areas like worktops and floors Suitable surfaces Wood surfaces Sealed/finished wood worktops and furniture Laminate surfaces Veneer (sealed) Interior doors, skirting, stair parts (finished) Stone & hard surfaces Quartz Granite Marble Slate Ceramic & porcelain tile Stone-effect / engineered stone surfaces Not recommended for Raw/unsealed timber (seal after repair) Flexible vinyl flooring or rubber surfaces Structural cracks, loose tiles, or deep breaks (these need a structural repair first) Areas in constant standing water (e.g., inside shower trays) Step-by-step instructions (best results) Clean the area Remove grease, dirt and residue. Dry thoroughly. Assess the damage If it’s a chip or deeper scratch, use the repair filler first. If it’s only a light surface scuff, you may go straight to scratch cover. Apply the repair filler (for chips/deeper marks) Press filler firmly into the damaged area using an applicator/spatula. Slightly overfill to allow for finishing. Allow to dry Let the filler fully cure (follow your kit label guidance). Ensure it’s hard before finishing. Level and smooth Carefully smooth/level the repair so it sits flush with the surrounding surface. Remove dust. Apply Scratch Cover Apply a light, controlled coat over the repaired area (and slightly beyond) to blend the finish. Build gradually rather than soaking the surface. Wipe/feather edges & let dry Gently feather the edge for a seamless blend. Allow to dry fully, then apply a second light coat if needed. Final check & protect Once fully dry, lightly buff if required. Keep the area dry and avoid heavy use until the repair has fully set.