VonVVer 60kW Pool Heat Exchanger 200,000 Btu/h, 304 Stainless Steel Heater for Swimming Pools, Hot Tubs & Outdoor Ponds, Output, Compact 5x19 Inch, Max Pressure 145 PSI, Suitable for Fresh/Salt Water

• [ High-Efficiency 60kW / 200kBtu/h Heating ] - This powerful swimming pool heat exchanger delivers rapid heating with an output of 60kW (200,000 Btu/H), efficiently raising your pool water temperature based on a 140°F (60°C) temperature difference for immediate comfort without long waits.
• [ Durable 304 Stainless Steel Construction ] - Built entirely from corrosion-resistant SS 304 stainless steel with a polished finish, this pool heater is designed for longevity and is suitable for use with both treated freshwater and saltwater pools, hot tubs, and spas.
• [ Optimized Flow with Reverse Port Design ] - Featuring a unique reverse inlet/outlet configuration on opposite sides, this heat exchanger optimizes water flow dynamics to maximize heat transfer efficiency between the separate pool water and boiler water circuits.
• [ Compact & Flexible Installation ] - With compact dimensions of 5x19 inches (13x48 cm) and the ability to be mounted either vertically or horizontally, this unit saves valuable space and can be easily integrated into your existing pool equipment setup.
• [ Energy-Saving & Reliable Operation ] - The innovative internal bellows design ensures high-velocity flow for efficient thermal transfer, maximizing energy use from your boiler or solar source. Its purely mechanical operation requires no electrical connection, ensuring reliable and economical performance.

Protective Housing: A high-quality 304 stainless steel shield can protect the heating element from direct contact with people or animals, to protect your use of safety. Reverse Outlet & Inlet: The inlet and outlet are reversed, both on opposite sides, which can optimize water flow dynamics and improve heat transfer efficiency. Specification Model: MF-200 Color: Silver Mount Type: Freestanding Assembly Required: Yes Material: SS304 Stainless Steel Process: Polishing Power: 60 kW Output: 200kBtu/h Pressure Test: Pool Water Circuit--10bar Hot Water Circuit--5bar Pressure Bearing: 2.5kg/ 5.51lbs Pool Water Flow: 250L/55 Gallon /min Hot Water Flow: 30L/6.6 Gallon /min Max Pressure: 145 PSI Max Temp: 110℃/230 °F Applicable Pool Volume: 250m³ Product Size(D*H):13*48cm/5*19in Side Port Size: 5cm/2in Top Port Size: 3.5cm/1.4in Package Size: 49*17*17cm/19.29*6.69*6.69in Gross Weight: 4.7kg/10.36lbs Package Included 1* Swimming Pool Heat Exchanger 1* Chinese and English Manual All Accessories for Use Notes Verify product style and size (5"x19") before purchase. Read the manual and all safety instructions fully before installation and use. Max chloride in water below 140°F is 300 mg/L (reduce at higher temps). Exceeding this or direct chlorinator use can cause pitting. For high-chloride/saltwater, a titanium exchanger is recommended. Install in a counter-flow pattern, downstream of filter/pump, as an auxiliary to boiler water. Prevent air locks. Keep people out of the water during operation. Do not install two exchangers in one pool simultaneously. Requires connection to a heating circuit and a thermostat circuit for proper, continuous operation.