LOWENERGIE LED Tube Light T8 Fluorescent Replacement 4ft, 120cm High LUX Energy Saving (1, 6000K Clear) (1, Clear)

• Lowenergie LED Tube lights are the future of low energy with long life operation. Energy Efficient & Environmentally Friendly with no hazardous materials like mercury used in fluorescent tubes.
• These Lowenergie LED tube lights look exactly the same as fluorescent tubes when turned on but use half the power. The 4000K neutral/cool white colour is equivalent to the old 840 fluorescent tubes. The 6000K day white colour is equivalent to the old 865 fluorescent tubes.
• When changing a fitting from fluorescent to LED tube lights - firstly the fluorescent Starter MUST always be removed - we will provide instructions relating to this. We do also recommend a very simple wiring alteration within the light fitting to remove the fluorescent starter and ballast transformer for longest life and maximum energy savings. Our Lowenergie led tubes simply operate by 240v live feed to both pins at one end and neutral feed to both pins at the opposite end which is the same as the current fluorescent fitting wiring. Ballast transformers are always recommended for removal for full energy saving potential as this will still use 2-3 watts wasting some energy.
• There may be some instances where the tube holders need to be turned through 90 degrees to ensure the light output for the new led tube faces downwards although this may only be for some types of quad light units. The long term energy savings are still well worth the effort.

Our ‘Lowenergie’ Budget Range of LED tubes are high LUX light output with specialist polycarbonate tubes, allowing the LED strip to be secured inside. These LED Band E tubes are now slightly brighter than traditional T8 fluorescent tubes and still give you the 60-70% energy saving over fluorescent. This budget LED Tube is now 5% lower watts power consumption and 15% brighter than slightly older type band F tubes. Lowenergie LED Tube lights are the future of low energy with long life operation. Energy Efficient & Environmentally Friendly with no hazardous materials like mercury used in fluorescent tubes. LED tubes benefit excellent 60-70% energy savings over traditional fluorescent tubes with big savings on your electricity bill and quick payback on your investment. Typically, these LED tubes pay for themselves in electricity savings within 2 years, however, this cheaper range of budget LED tubes can pay for themselves in as little as 1 year with 14-16 hours a day usage. If you have long hours of lighting usage, more than 6-8 hours a day, our aluminium LED tube range would be better suited which enables more efficient LED cooling for longer life. These Lowenergie LED tube lights look exactly the same as fluorescent tubes when turned on but use half the power. The 4000K neutral/cool white colour is equivalent to the old 840 fluorescent tubes. The 6000K day white colour is equivalent to the old 865 fluorescent tubes. Our LED tube lights are compatible with PIR occupancy sensors for maximum potential energy savings which is not normally guaranteed by all manufacturers. Lowenergie LED tubes are also Class II double insulated. LED tubes have no flickering, no electric interference and instant brightness. LED tubes are also low heat production helping to reduce loads on air conditioning systems. TECHNICAL INFORMATION Lamp holder: G13 CCT Colour: Neutral White 4000K or Day White 6000K options Input Voltage: 165 – 265V Power Consumption: 18W Light output: 1980 Lumens Lifespan: 25000 to 30000 hours Dimensions: 4ft – 1200mm Energy Rating: E Rated Power Consumption 18Kwh/1000 hours Lumens per Watt: 113 Beam Angle 320 degrees Working Temperature -20 to +45 degC Colour Rendering: 82-89 Materials High purity, impact resistant polycarbonate tube, no glass Warranty: 2 Year Warranty Approvals CE & UKCA RoHS: Compliant Package: Each boxed separately Note:- When changing a fitting from fluorescent to LED tube lights - firstly the fluorescent Starter MUST always be removed - we will provide instructions relating to this. We do also recommend a very simple wiring alteration within the light fitting to remove the fluorescent starter and ballast transformer for longest life and maximum energy savings. Our Lowenergie led tubes simply operate by 240v live feed to both pins at one end and neutral feed to both pins at the opposite end which is the same as the current fluorescent fitting wiring. Ballast transformers are always recommended for removal for full energy saving potential as this will still use 2-3 watts wasting some energy. There may be some instances where the tube holders need to be turned through 90 degrees to ensure the light output for the new led tube faces downwards although this may only be for some types of quad light units. The long term energy savings are still well worth the effort. Please be aware of which bulb you are purchasing and that the bulb dimensions are suitable for your light fitting. These Led Lights are not suitable for use with dimmer switches.