8M Laminate Flooring Threshold Transition Strip,PVC Door Bars for Doorways,Self Adhesive Vinyl Floor Edge Trim,Tile to Laminate Beading,Floor Joining Strip Gap Covering(4cm,Grey)

• PVC Material: The floor transition strip is made of high quality PVC material, soft and flexible, scratch-resistant and wear-resistant. Unlike ordinary metal floor sill products, this PVC material features better softness and fit..
• Wildly Use: The floor transition strip can be used for floor-to-floor and tile-to-floor, wood-to-floor gap coverage and connection,threshold transition at the edge of the floor ,and ground identification demarcation.
• Size: The size of floor cover strip is 8m long, 4cm wide, 3.5mm thick.it can be free to cut to any size as you need, please measure the required size before cutting.
• Easy to Install: First clean the floor or tiles and dry,then cut the required length according to the needs, and then paste one end first, tear off the tape, and press and install it at the same time.
• Kindly Reminder:1.When installing, please make sure the floor is clean and smooth, don't installed on the uneven surface.2.The product may be squeezed and deformed during transportation ,you can reverse the bending and press the transition strips with a heavy object for 1-2 hours to make it flat again. 3.when the temperature is below 20℃，please use a hairdryer to reheat the backing adhesive.

Installation : 1.1. Please wipe the surface, make sure the surface is clean and dry. 2.Cut both ends of the molding trim into 45° according to the measured size; 3.Peel off the adhesive backing and stick it onto the smooth corner you need. 4.Please wait patiently for 24 hours to complete the final decoration work. TIPS: 1.In the cold season,it is suggested to use a hairdryer to heat the adhesive strips for better sticking effect during installation; 2.Clean the surface and dry it before installation! 3.The moulding trim suit for all kinds of Smooth Flat floor,such as smooth marble floor,coating floor and other smooth surface.Not suit for severe sags and crests floor, big gap floor and mosaic glass floor; 4.Please make a mark in advance to avoid repeated sticking, which will affect the stickiness; 5.After the installation is completed, it needs to be kept dry for 24 hours.