NoxGule 170g Vinyl Repair Kit, Vinyl Cement, Contact Adhesive Glue, Neoprene Glue, Strong Adhesion, Waterproof, Suitable for Inflatable Boat, Air Mattresse, Swimming Pool, Kayak, Trampoline

• Super Strong Repair Adhesive: This Vinyl Cement for inflatable boats forms a strong bond between repaired areas, ensuring a safe and flexible seal. Holes, tears, and other damage can be easily repaired. It is durable, airtight, flexible, and waterproof
• Long-Lasting and Durable: This contact cement will not dissolve even in humid environments. Furthermore, this contact adhesive boasts superior performance, withstanding high and low temperatures and effectively preventing aging
• Precise Application: This PVC glue comes with a brush for precise and clean application. No adhesive residue is left, ensuring a clean and flawless repair
• Easy Application: This super strong adhesive with a brush allows for precise, clean, and even application across the entire surface. After curing, it forms a clear, flexible sealant that prevents cracking and brittleness. It is durable. After 24 hours, when the bond strength reaches its maximum, the material will be permanently bonded
• Versatile Application: Suitable for bonding PP, PE, PVC, ABS, EVA, and rubber materials. The pool repair kit is ideal for repairing air mattresses, inflatable pools, tents, and tarpaulins. It is a durable and versatile repair solution

Product Name: Vinyl Cement (PVC Adhesive for Inflatable Boats) Contents: 170 g Color: Transparent Viscosity (mPa·s/25 °C): 6000 Curing Time: 24–48 hours Shelf Life: 3 years Properties: Excellent water resistance, impact resistance, high adhesive strength, cold and heat resistance, and excellent sealing properties Application: Suitable for bonding PP, PE, PVC, ABS, EVA, and rubber. Ideal for repairing air mattresses, trampolines, swimming pools, boats, tarpaulins, kayaks, etc. Application: Ensure the PVC surface to be bonded is clean and dry. Using a brush, apply a sufficient amount of PVC adhesive evenly to the surface. Carefully spread the adhesive. Using a suitable tool, apply pressure to the PVC material to ensure complete penetration of the adhesive and a strong bond. Wait 24 hours for the adhesive to fully cure. Avoid moving or damaging the bonded material during the curing time. Safety Instructions: Ensure good ventilation of the work area before use. Tightly close the cap after use to prevent the adhesive from evaporating or drying out. In case of contact with eyes or skin, rinse immediately and thoroughly with water. Keep this product out of the reach of children.