Vrabocry COB Running Water Flowing Chasing 5M LED Strip Lights WS2811 24V Horse Race Sequential LED Ribbon with 3Key RF Controler+24V 100W Power (Cool White 6000K)

• WS2811 horse running led strip is Low power consumption running with low temperature,All the light spread and completely smooth, luminous even
• Power Supply: 100-265V AC to DC 24V 100W LED power supply can drive 5 meters WS2811 horse running pixel led strip
• Wireless Controller:Mini SPI LED strip controller with panel wireless remote control. Powered by CR2025 Battery (not included),Max control 2048 Pixels(IC),Speed/Brightness is adjustable,10 Kinds of different modes changable,With Double-side tape on the back,easy to install at anywhere
• Application Making led screen,Rooms Staris Flashion Show.led wall, advertising board. Apply to hotel, KTV, bars, advertisement company, decoration company,the city lighting project, entertainment and leisure places lighting.
• Package Inlcuding: 1pcs 3Key Controller(there is NO battery in the controller !!!) 1pcs 5M COB LED Strip 1PCS 24V 100W Power

Product Name: WS2811 IC COB Horse Race Led Strip LED Type: COB LED Diodes LED Qty: 360LEDs/M PCB width:10mm Max Power: 10-12W/M Working Voltage: DC 24V Color: Cool White Color Temperature: Cool White 6000K IP Rate: IP20 Non-waterproof Connector: 3 Pin Male & Female Connector Package: 5M/Roll  Connection: Red Wire: +24V Green Wire:DI/DATA White/Black wire: GND / -24V  Wireless RF Controller with 3-Keys Panel Remote: Working Voltage: DC 24V Max Control Pixels: 3200 Pixels Effects Mode:Up to 23 Kinds effects. Speed and Brightness adjustable Remote: 3 Buttons, Speed/Brightness - ON/OFF - MODE Battery Powered by CR2032 Button Cell ( Battery not included) Our controller has short-circuit protection function (Some others are easy to be burned out )  How to setting pixels number? Step 1: Turn OFF the lights Step 2: Long press "Mode" keys 5 seconds,press "Speed" keys to increase the pixels quantity, Press "Mode" keys to decrease the pixels quantity. Step 3: Press " ON/OFF" to save, Exit. Default factory setting is 80pixels,max up to 3200pixels. If you found some led strip is not light, please kindly do pixel setting as above steps.  How to pair Remote to the Receiver,make them working 1 to 1 independently ? Step 1: Turn OFF the power supply. Step 2: Long press "Mode"keys 3 seconds within 2 seconds after powering ON. Step 3: Sucessfully if the led strip quick flash 3 times. 1pc receiver can be controlled by max 6pcs panel remote.  DC 24V 100W Power Supply: Input Voltage: 100V-265V AC Output Votage: 24V DC Output Power: 100W  Package Inlcuding: 1pcs 3Key Controller(there is NO battery in the controller !!!) 1pcs 5M COB LED Strip 1PCS 24V 100W Power