PSTAR COB LED Strip 5 m, 24 V Warm White COB LED Strip 2700 K 320 LED/M with RF Remote Control, Interior Lighting for Home, Bedroom, Kitchen, Mirror

• 【High brightness and uniform light distribution】 8 mm COB LED strip, thanks to COB technology, 320 LEDs/m. It eliminates the dark spot problems typical of traditional LED strips, COB LED strips are efficient and consume little energy. Compared to SMD lights, they reduce consumption, reduce electricity costs and environmental impact. They operate at 24V DC low voltage, generating little heat, safe for children and pets.
• 【Dimmable COB LED Strip】The 2700K COB LED strip is dimmable and comes with an RF remote control that allows you to adjust the brightness, so you can easily switch from 10% to 100% brightness gradually, and the warm white COB LED strip has a memory function to retain the light effect when it was last turned off.
• 【Easy to Install and Use】 The 24v COB LED light strip comes with a self-adhesive strip on the back. You can wipe the surface of the object you want to install the strip clean and then tear the strip. Note, please make sure to keep the surface clean and well-organized before installation, so that the adhesive performance will be better.
• 【Cuttable】 The COB LED light strips are flexible and can be cut every 5.2 cm. You can customize your room or party as you like, the COB LED strip can be widely used for the bedroom, kitchen, TV backlight, mirror, living room, gallery, nursery, entertainment area, garage, kennel and other indoor decorations. Note: Because the adhesive film is too thin, please remove it with a sharp object.
• 【Widely Used】24V COB LED strip with a lifespan of 50,000 hours, If there is any quality issue with the COB strip, please contact us and we will respond within 24 hours. The 2700K white COB LED light strip is ideal for clubs, cabinets, mirrors, closets, shelves and other dry / clean / smooth places requiring DIY lighting decoration.
• Note: If you have purchased multiple sets of light strips and want to use them independently, or if the lights flash or turn off automatically, this indicates interference from other wireless devices. Please follow the following steps: unplug the power supply, then plug it back in. Within 5 seconds, press the SPEED- and SPEED+ buttons on the remote control simultaneously. The lights will flash once to indicate that pairing has been successful. If you have purchased multiple sets of string lights, you must unplug all power cables, then plug in the power supply of each set individually.

1