ECOPROTEC Porcelain Paving Enhancer - Film forming shine sealer for external porcelain (ECO/27/1L)

• ✅ WATER BASED SELF SHINE ENHANCER: For Porcelain Tiles & Pavers for the ‘just washed’ look.
• 🌟 APPEARANCE ENHANCEMENT: Creates an attractive finish that highlights the natural beauty of porcelain surfaces. Enhances and embellishes - A low maintenance film forming surface sealer & protector.
• 🔵 UV RESISTANT & BREATHABLE: Resistant to wear and stains Suitable for use in both domestic and commercial environments.
• ✅ ENVIRONMENT FRIENDLY: Minimal change to slip resistance. Creates a durable wear layer barrier that guards against wear, stains, and daily deterioration. Minimal change to slip resistance. Environmentally friendly
• ✨LOW MAINTENANCE: Facilitates cleaning and aftercare maintenance. Maintain Enhanced floors with ECOPROTEC General Cleaner.
• ✔️ FOR EXTERIOR & INTERIOR USE- COVERAGE: Square Metre Per Coat; Lower porosity surfaces – 1LTR 30-40m², 5LTR 150-200m². Shelf Life – Up to 2 years for un-opened containers.
• ☝️EASY TO APPLY: Apply using a foam roller, sealant applicator pad or paint brush. Application Tools link ; https://www.amazon.co.uk/gp/product/B00H1QPZWE?th=1 Sealer Pack at Link; https://www.amazon.co.uk/LTP-Sealer-Pack-applicator-Applicator/dp/B08GL935M2/

WATER BASED SELF-SHINE ENHANCER- For Porcelain Paving. Exterior & Interior Use. A low maintenance film forming surface sealer & protector. Enhances and embellishes the appearance. Highly resistant to wear and stains. Facilitates maintenance and cleaning. Leaves surfaces with a ‘just washed’ look. DIRECTIONS FOR USE; Preparation: Newly installed surfaces - Ensure surface to be treated is completely clean, dry, and free from dirt, grime, cement, and grout. (see ECOPROTEC Cement, grout & Salt Remover). Existing surfaces - First clean and degrease surfaces with ECOPROTEC Intensive Cleaner. Rinse well. Leave to dry out thoroughly (24 hrs) Application: Clean and dry surface - Apply using a foam roller, sealant applicator pad or paint brush. Pour contents into a separate container or dip tray. Apply to the surface without rubbing until an evenly thin film is created. Allow to dry (1 hr). For a more enhanced appearance further coats should be applied at right angles to the first (max.4.) Do not over apply as a heavy layer or too many coats may cause unsightly build up/affect slip resistance and/or reduce the efficiency of product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully resistant. Always test first to establish the correct method of application and optimum number of coats before general use. Avoid extremes of temperature. Surface temperature range for application between 5°C - 25°C For application and cleaning tools see Amazon ASIN; B08GL935M2