Helical Remedial Wall Ties - Titan Ties ® - 50Nr (220mm)

• 50Nr Helical Ties Available Loose or as a Kit with Setting Tool & Drill Bit
• Easy Cavity Wall Tie Replacement Kit
• Size table can be used to pick right tie length (see more product details) - assumes that facing brickwork is 110mm wide imperial brickwork (make adjustment for small widths / 100mm metric bricks).
• We recommend that you test the strength of substrate before choosing the appropriate drill hole
• Helical ties must have a minimum embedment in the inner (load bearing) leaf of 70mm.

Helical Remedial Wall Ties 50 Ties Available Loose or as a Kit Kit Contents: 50Nr Helical Remedial Wall Ties Standard 2-Piece Installation Tool SDS+ Masonry Drill Bit What Length of Helical Tie? Tie Length Cavity Size 170mm 0mm to 5mm 195mm 5mm to 25mm 220mm 30mm to 50mm 245mm 55mm to 75mm 270mm 80mm to 100mm 300mm 105mm to 130mm 320mm 130mm to 150mm 345mm 155mm to 175mm 370mm 180mm to 200mm 400mm 205mm to 230mm 425mm 235mm to 255mm 450mm 260mm to 280mm How to Install: 1). Drill the pilot holes through both leaves to the required depth and diameter. Drill the holes 10mm longer than the tie and to achieve a minimum 70mm embedment in the inner leaf. 2). Insert the rod driver installation tool tool into an SDS rotary hammer drill. All small remedial wall tie kits are sold with a 2 Piece Installation Tool, which comprises a rod-driver and a recessing tool. 3). Insert the remedial wall tie into the rod-driver and drive as far as it will go. When the drill is removed, the tie will be projecting approx 10mm from the face of brickwork. Insert the recessing tool into the rod driver, then drive the tie so that it is recessed into the wall. 4). Make good to the pilot hole, using Titan Ties Injectable Repair Mortar