10Pcs Brass Misting Nozzles, 0.2mm High Pressure Spray Misting Nozzle, Anti-Drip Fogging Spray Head Misting System Nozzle

• High Pressure Start: The nozzle can only be fully opened when the pressure reaches 20-100kg/cm²/284.47-1422.33lb/inch², which allows precise pressure control and ensures that the water flow becomes fine fog at its best. But please note that in areas with high water hardness, calcium and magnesium ions in the water may gradually form scale. It is recommended that the water be filtered and then used, otherwise it will result in clogging of the nozzle so that the water cannot come out properly
• Good Atomization Effect: The spray nozzle adopts filter, the spray holes are made by using high precision perforation machine, which refines the water flow into tiny mist particles. This technology makes the water mist particles more uniform, improves the fogging effect, and enhances the coverage and penetration of the fog
• Fine Craftsmanship: The brass misting nozzle design incorporates anti-clogging and anti-drip plug technology, every detail has been carefully considered. The mister nozzle passes the strict water test to ensure a very low defect rate of less than 0.01%, demonstrating the relentless pursuit of quality
• Reliable Materials: The mister replacement nozzle is made of brass as the base material and contains stainless steel spray sheet, which has good corrosion resistance and mechanical strength. This material combination of mister heads can resist the erosion of the harsh environment on the equipment, to ensure the stable operation of the nozzle to extend the service life of the misting nozzle
• Wide Uses: The high pressure spray misting nozzle is suitable for greenhouses, construction sites, farms and other scenes, usually used for cooling, dust removal, humidification and disinfection. Mister nozzles brass can improve the efficiency of water use, making the use of water resources more economical and environmentally friendly

Specification: Name: Brass Misting Nozzle Material: Brass, Stainless Steel Length: 24.5mm/0.97in Thread: 4.5mm/0.18in Operating Pressure: 20-100kg/cm² / 284.47-1422.33lb/inch² Hole Diameter: (Optional) 0.1mm/0.0039in 0.15mm/0.0059in 0.2mm/0.0079in 0.3mm/0.0118in 0.5mm/0.0197in Spray Volume: As Shown Package Included: 10 * Brass Misting Nozzles