NICERINC Boat Trailer Bunk Slide Pads and Boat Trailer Glide Bunk Enders，Boat Trailer Bunk for Launching & Loading Boat on/Off Trailer Easier,Boat Trailer Bunk Slicks （Black,3" x 10"

• MAKES LAUNCHING AND LOADING YOUR BOAT EASY - Slide trailer slides mount directly to your bunks to enable your boat to slide smoothly on and off the trailer. Protect the end of the bunks with the Bunk Enders.Makes loading and unloading the boat on/off the ramp much easier!
• WIDE RANGE OF APPLICATIONS - Fit for almost any bunk trailer,includes 2", 4" 6" trailer bunks.Boat weight limitation: 1,500 lbs for fiberglass boats, 4,000 lbs for metal boats
• EASY TO MOUNT - Using the included stainless steel screws, our slides and Bunk Enders fit easily and securely into a 2“, 4“or 6” trailer berth. Just be make sure the screws drop into countersink area to prevent scratching the boat hull
• MADE TO LAST - Slides and Bunk Enders are made in the USA using slick, high-density polymer plastic and are designed to last in a marine
• NOTE - The size and shape of the trailer frame can vary greatly, please measure your boat on the trailer before ordering to ensure proper dimensions. For more tips, please refer to the accompanying instructions

Package includes: Kit 1: 4 Pads (3"x10") + 2 Bunk Enders + Stainless Steel Mounting Screws Kit 2: 8 Pads (3"x10") + 2 Bunk Enders + Stainless Steel Mounting Screws Kit 3: 16 Pads (3"x10") + 4 Bunk Enders + Stainless Steel Mounting Screws Kit 4: 2 Bunk Enders + Stainless Steel Mounting Screws Easy to install,3-5 minutes slide on/off job done: Just take the boat to the marina, then back the truck down to the water, release the cable holding the boat to the trailer slowly, finally boat slide down smoothly and into the water. Warm Tips: 1. Don’t release the boat from the trailer hook before taking boat out of water. 2. Keep winch strap connected&locked boat from the trailer until it is in the water. Otherwise boat may will slide off trailer. 3. The screw should be tighteded gently as over-tightening may damage the boat trailer bunk slick pads. 4. Make sure screws and screws heads should be below the surface of the pads and in the molded holes to prevent scratching of the hull Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/se*ad**/waverunner/fishing boats.