Osmo Polyx Oil Tints, Semi Matt Finish (375ml, 3071 Honey, Semi-Matt)

• A versatile, premium, protective, tinted hardwax oil for use on most interior wood surfaces
• Ideal for use on wooden floors and furniture
• Hard-wearing and extremely tough
• Scratch and scuff-resistant, whilst protecting against liquid spills
• Does not crack, flake, peel or blister
• Dries to a coloured, Semi-Matt finish
• Safe for humans, animals and plants when dry
• Please note, these items are mixed using an Osmo Tinting machine to create your oil.

Product description Slightly tinted to perfection. Osmo Polyx-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture. All the renowned properties of the original Polyx-Oil, are tinted for individual creativity. Polyx-Oil Tints are water-repellent, dirt-resistant, and durable. The surface is pleasant to touch, has an even and harmonic optic, and is based on natural, renewable raw vegetable materials. Features & Highlights A versatile, premium, protective, tinted hardwax oil for use on most interior wood surfaces Ideal for use on wooden floors and furniture No. of coats: 1 + Polyx-Oil Application temperature: +5°C Drying time: 24 hrs. Hard-wearing and extremely tough Scratch and scuff-resistant, whilst protecting against liquid spills Easily maintained and renovated if required Does not crack, flake, peel, or blister Dries to a coloured, Semi-Matt finish Safe for humans, animals, and plants when dry High V.O.C Preparation Surfaces must be clean and dry, removing all traces of dust and dirt before application (maximum moisture content 20%). Only apply on a frost-free surface. For guaranteed performance, Osmo recommends that all traces of previous finishes are removed to expose clean, bare wood. Existing oiled surfaces can be lightly rubbed back with meths and then fully cleaned Pre-existing paints, varnishes, waxes, and sealers must be completely removed by sanding or with a suitable stripper or remover Use Osmo Interior Wood Filler to repair small dents and holes To protect against blue stain in moist surroundings, pre-treat with biocide-free wax impregnation Osmo Wood Protector Application Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Osmo Polyx-Oil Tints are ready-to-use from the tin, do not thin. Stir thoroughly prior to and periodically during application to ensure a consistent finish. Osmo oils dry via oxidation so it is important to ensure good ventilation during application and drying. The ideal application tool is a firm, fine, natural bristled brush. For the best results, apply thinly and remove any excess oil from the surface of the wood with a clean, lint-free cloth. Apply first coat thinly and evenly along the wood grain with an Osmo Brush Remove any surplus oil from the wood and leave it to dry. Usually, touch dry in 8 to 10 hours Lightly de-nib the surface Remove all traces of denibbing/sanding dust with a vacuum cleaner Apply a second thin coat and allow to fully dry Allow 24 hours before exposing the floor to normal use Aftercare For daily maintenance, a duster, mop, or vacuum cleaner will be sufficient. For commercial premises, an electric floor polisher can be used. Directions Transparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 24 hours under good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal two coats). Lightly stained effect: Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours under good ventilation. Intensive colour: For this application, we recommend Osmo Wood Wax Finish or Osmo Oil Stain.