PATIKIL 20CM 30W 12V Foam Cutting Pen, Electric Hot Foam Cutter Pen Cutting Machine Pen Tool Hand Held Engraver for DIY Art Craft, Blue

• Color: Blue, Material: Metal, Stainless Steel, Voltage: 12V, Power: 30W, DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch, Metal Pen Length: 20CM / 7.87 Inch, Total Length: 35CM /13.78 Inch, Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.)
• Advantage: The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds. Non-slip Insulating Rubber Handle: The non-slip rubber handle and the electric heating pen are lightweight, so your hands will not be tired after a long time of cutting work. The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments.
• Instruction: Step 1. Connect and switch on the power adapter. Step 2. Turn the switch on and wait for the temperature to rise to the usage temperature. Step 3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut. Step4. After cutting, turn off the switch and wait for the foam cutter to cool down. (Recommended to rest for more than half an hour after 30 minutes of use.)
• Application: It can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for small craft model making, advertising font production, DIY hand model making, etc.
• NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering. 2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.

The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc. Specification Color: Blue Material: Metal, Stainless Steel Voltage: 12V Power: 30W DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch Metal Pen Length: 20CM / 7.87 Inch Total Length: 35CM /13.78 Inch Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.) Advantage The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds. Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work. The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc. Instruction Step1. Connect and switch on the power adapter. Step2. Turn the switch on and wait for the temperature to rise to usage temperature. Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut. Step4. After cutting, turn off the switch and wait for the foam cutter to cool down. Recommended to rest for more than half an hour after 30 minutes of use. NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering. 2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.