GLDYTIMES 8.5x2.0 Inch Scooter Tyre 8 1/2 x 2 50/75-6.1 Solid Tyre for Xiaomi Mi Pro2/ Pro/ M365/ AOVOPRO Electric Scooter, Replacement Front/Rear Explosion-proof Tire Red

• ⭐【Great Compatibility】These solid tires fit for gotrax gxl V1/V2/ XR Ultra, Hiboy MAX/S2/MEX3, Xiaomi Mijia m365/ pro, HYPER GOGO, Hover-1 Journey, Swagtron Electric Scooter etc. They can replace the 50/75-6.1 and 50-134 inner and outer tires.
• ⭐【Features】 Our 8.5 inch tire: No swelling, no tube, no pinning, no need to worry about puncture, no maintenance, always in the best condition. As a result, tires can withstand any pressure change, just as regular tires are as strong when fully inflated.
• ⭐【Good Grip 】Our 8.5x2.0-6.1 Tyre is made of good quality natural rubber, with rubber grooved surface provides excellent grip while providing more power to the scooter ! The excellent pattern design facilitates rapid drainage and strong climbing.
• ⭐【Installation】To install an 8 1/2 solid tire, it must be heated three times in a microwave oven, then relaxed slightly or boiled in boiling water for 10 minutes. For detailed information on the installation video, please refer to the manual or seek help from GLDYTIMES.
• ⭐In order to save your time and money, please make sure the original tires of your scooter are 8.5 inches before purchasing to avoid time-consuming and costly returns. If you can't be sure, please contact us.^_^

🔔🔔Great shopping experience! Brand: GLDYTIMES Product Name:GLDYTIMES 8.5 Inch Solid scooter Tyre Applicable model:8.5 inch solid tire suitable for ✅Xiaomi Mijia Pro 2 ✅Xiaomi M365 ✅Xiaomi Pro ✅AOVOPRO ES80 ✅Denver Sco-8535 ✅Vivobike S2 / Vivobike S3 ✅Hyper gogo ✅Hyper gogo/ ✅Swagtron SG-5/Swagger 5 Boost ✅Ducati Pro1 Evo / Ducati Pro1 Plus ect.Electric scooter and all 8.5 inch tire 🔔Model: 8.5 inch 8 1/2 Weight: 1pcs 0.7kg ; 2pcs 1.3kg Material: rubber Condition: 100% brand new Color: As shown in the picture Packaging quantity: as shown in the main picture Features: solid, tubeless,explosion-proof,puncture-proof Attention: Due to its rubber material, an oven needs to be used for softening before installation can proceed; This means that installation is not an easy task, but the results are worth acknowledging. 🔔The installation process consists of two parts: Remove the inflatable tire. 1. Find the red label and pull it off then loosen the two screws below it. 2. Remove the first plastic cover then loosen the other four small screws below it. 3. Turn the scooter over to the other side and repeat the process. You should now be left with one nut embedded deeply into the wheel under a plastic cover that is attached to the wheel support system. 4. Lift the cover slowly to avoid cracking it then loosen the nut below it using a wrench. 5. Remove the nut. The wheel is now loose enough to slide out easily.