Flat Fox Screen Printing Opaque Water Based Fabric Inks (Dark Red, 100g)…

• PERFECTLY OPAQUE - for excellent coverage on Dark & Light Fabrics
• PERFECTLY ECO-FRIENDLY🌱🌎 water-based and free from white spirit, APEO and phthalates, cleans using just water
• PERFECTLY BRILLIANT COLOUR PRINTS 🌈 with a soft feel & stretch
• suitable on cotton, polycotton & polyester
• Suitable for Screenprinting , Block Printing , Lino Printing or hand painting

Try out our Premium Perfectly Opaque inks! Not only are they perfect for printing onto DARK and LIGHT cotton, polycotton and polyester fabrics, they will also give you excellent coverage and brilliant colour prints with a soft feel and stretch. PERFECTLY ECO-FRIENDLY: Free from white spirit, APEO and phthalates. Clean up using only water! Our inks are manufactured with the strictest requirements and limit values meeting the strict ecological and toxicological criteria, providing the highest level of consumer safety. It promotes environmentally and socially friendly products. Recommendation for Use Before going into production we recommend making it a rule first to test the suitability of the print pastes for the substrates to be used as to their wash fastness. Be careful of excess dyes in polyester fabric which can migrate into ink colours when heat is applied to cure. Viscosity of the ink can be decreased by adding small amounts of water (up to 10 %). Curing Inks / making inks wash fast Once dry the inks can be cured at 160°C for 30-40 seconds using a heat press. You can use an iron and other methods for curing but always do wash tests. Wait at least 1 hour after curing before doing a wash test and make sure inks are completely dry before curing. Printing Process Applicable in all common screen printing processes; screens 43T – 77T depending on the design and fabric quality. Best possible coverage as well as colour brilliance is achieved by repeated printing with intermediate drying or printing colours onto a white underbase. Use pallet adhesive to keep your fabric from moving between prints. For maximum coverage and best results, print through lower mesh counts 43T/55T. Printing with off contact (having your screen slightly off the print surface) will give more even ink coverage and help with opacity when printing onto dark fabric. Storage If stored properly in a cool place in closed original containers, the product will hold for 12 months. Protect from frost and excessive heat. Opened containers must be closed again tightly. Stir up before use. Cleaning up Use water for screen and equipment MADE IN THE UK