Redunest Cabinet Handles Matte Black Furniture Handles Square Drawer Handles 2 Pack 224mm Hole Centers

• Hole Centers: 224mm hole centers (224mm), please carefully measure your cabinet's hole centers and then decide what size you need
• Product dimensions: total length 236mm; width: 12mm; height: 35mm
• Material: black stainless steel cabinet handles, hollow but strong and beautiful for your needs
• EXTREMELY REASONABLE PRICE: our handles are much lower than your local hardware store but of good quality, very affordable
• Package Contents: 2 black cabinet handles, 4 long screws, 4 short screws. You can select the right size according to the thickness of the cabinet. Each handle is individually wrapped and packaged to protect the beautiful color

Good quality and will not fade. Form a complete set screw, convenient to use. Comfortable to touch. A great help when pulling out drawers, opening cabinets and other furniture. Style: Modern, American, stainless steel, simple and elegant design, does not fade easily. Note: - Step 1: The spacing of holes for handles of different sizes is different, so it is necessary to use an adhesive tape. Measure to determine the hole distance between the handles, which must be precise, because it is necessary to determine the drilling position of screw holes on the cabinet door. Step 2: First, determine the installation position of the cabinet door, which depends on the cabinet door as well as the height of the cabinet and the position of the cabinet door. Normally, it is best to take the best setting as your preferred setting, then directly Compare the hole spacing of the just measured handle vertically on the cabinet door panel and then mark the hole position with a marker pen. Step 3: Choose a drill with the appropriate size. Generally, the handle has a small hole position. Then use an electric drill to drill vertically at the marked position. Step 4: Hold the cabinet door handle with your left hand, align the handle with the hole, which has just been drilled, then pass the small screw through the hole from the back of the cabinet door and tighten the screw with a screwdriver after aligning it.