JJC Tripod Stand Pan Bar Remote Controller for Sony Camera Camcorder Cinema Camera with Multi & LANC Terminal on Manfrotto 502AH 502A 504HD 509HD 526 608 504X 526-1 612 Nitrotech N8 & N12 Fluid Head

• Adds a pan-handle based camera control to your setup, constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use, rotates and positions at any 10-degree interval while avoiding slippage or accidental loosening
• Works with Manfrotto video head features a thread diameter of 35mm and incorporates a M6 screw hole and 36 ridges, such as Manfrotto 502AH, 502A, 504HD, 509HD, 526, 608, 504X, 526-1, 612, Nitrotech N8, N12 etc.
• The remote controller is compatible with Sony camera & camcorder with multi-terminal connecting cable, such as FX3 FX30 ZV-1 A1 A9 A9II A /A7II A7III A7IV A7R A7RII A7RIII A7RIV A7RV A7S A7SII A7SIII A99II A77II A68 A58 A6600 A6500 A6400 A6300 A6100 A6000 A5100 A5000 A3500 A3000 RX1RII RX10 RX10II RX10III RX10IV RX100II /III/ IV/V/ VA /VI /VII, PXW-X70/ PXW-Z90V/ HXR-NX80, AX30/ AX33/ AX40/ AX43/ X53/ AX55/ AX100/ AX100E/ AX700/ AXP33/ AXP35/ AXP55, CX240/ CX405/ CX440/ CX455/ CX675/ CX900 etc.
• The remote controller is compatible with Sony & Canon LANC terminal connecting cable, i.e. HXR-NX100/ HXR-NX200/ HXR-NX5R/ HXR-NX3/ HXR-NX70/ HXR-NX30/ HXR-MC2500, PXW-FS5/ PXW-FS7/ PXW-X160/ PXW-X180/ PXW-Z100/ PXW-Z150/ PXW-Z190/ PXW-Z280/ FDR-AX700, Canon EOS C100/C100 II/ C200/ C200B/ C300/ C300 II, HFS20/HFS30/HFG10/HFG20/HFG21/HFG26/HFG30/HFG40/HFG50/HFG60,XA10/XA11/ XA15/XA20/XA25/XA30/XA35/XA40/XA45/XA50/XA55,XF100/XF105/XF200/XF205/XF300/XF305/XF310/XF315/XF400/XF405/XF605/XF705 etc.
• *Note: when being used with the Sony mirrorless cameras, the Zooming function of the remote commander can only work with power zoom lens such like the Sony E PZ 16-50mm f/3.5-5.6 OSS Lens. When used on Canon cinema cameras, as there is no motorized zoom function on the camera/ lens combination, the zoom control on the remote will not work. Please consider this point before your purchase.

This Pan Bar Controller replaces a standard Manfro. rosette-mounted pan-handle,which is especially designed for adding a pan-handle based camera control to your setup.Work with Manfro. Video Head features a thread diameter of 35mm and incorporates a M6 screw hole and 36 ridges.Compatible with Manfro. 502AH, 502A, 504HD, 509HD, 526, 608, 504X, 526-1, 612, Nitrote. N8 and N12. It enables you to control your camera/ camcorder by using a cable connected to the Multi/ LANC port rather than using buttons on the camera/ camcorder. This can make operation much more convenient and flexible for you, enables you to focus on the shot you are trying to capture rather than the mechanics of the equipment. Designed with a detachable multi-function controller, you can detach the controller from the tripod to prevent camera shaking when shooting still images. Hold the tripod and press the PUSH RELEASE button to pull the controller out. Slowly slide the controller onto the pan bar for easy attaching. And the controller functions with power on/ off, video/ still image recording, zooming, slow zooming, locking function and displaying grid line* Applies To Manfro. 502AH, 502A, 504HD, 509HD, 526, 608, 504X, 526-1, 612, Nitrote. N8 and N12. Package Includes Pan Bar Controller x1 Connecting Cable for Multi Terminal x1 Connecting Cable for LANC Terminal x1 Storage Pouch x1 Lanyard x1 Instruction Manual x1