zdyCGTime HDMI Solderless Screw Wiring Terminal Adapter HDMI Male to 20-pin/way Female Solderless Terminal Breakout Board Connector Signal Module with Housing.(2Pack/Male)

• HDMI high-definition solderless screw terminal connector. Connector 1:HDMI male interface. Connector 2:20-way/pin female screw terminal jack. Quantity: (2-pack) Material:Plastic case.
• HDMI terminal adapter,HDMI panel for easy wiring in engineering/home improvement, buried in the wall,compatible with HDMI 2.0, 19 1-pin (5P 4C ADB); 1.4 and 1.3. The length of the HDMI cable can be extended by connecting a single wire with an open cable end to your HDMI jack.
• Environmentally friendly copper terminal design, only need a screwdriver and a wire stripper,easy wiring does not require cumbersome tools,reducing the difficulty of engineering wiring,strip the head of the wire and put it in the middle of the screw column,tighten the screw,and the cable is well connected Pulling is not easy to drop, durable,resistant to unplugging,good contact.
• Widely compatible with HDMI cables, with 4 different diameter tail pipes, supporting cable diameters of 5mm, 7mm, 9mm and 10mm. It can be used with various HDMI cables on the market to better lock the cable body and prevent the cable from falling off after pulling.
• Widened and thickened double-hole buckle design,Easy to open and close firmly, and stable connection is not easy to loosen. It is suitable for TV computers, projectors, monitors, set-top boxes and other equipment with HDMI signals. It can be connected without soldering lines.

HDMI male to 20 pin/way female screw terminal block jack connector, supports cable diameter of 5mm 7mm 9mm 10mm. Quantity: 2 Pack Size:Length,Width, Height (6.1*2.3*1.6cm) Material: Plastic shell Connector 1: HDMI male connector. Connector 2:20-pin/way female screw terminal jack. Pins: 20/pin Compatible with all versions of HDMI interface, easy wiring does not require cumbersome tools, reducing the difficulty of engineering wiring, and the cable is not easy to drop when connected well. Double-hole buckle design, the connection is firm, and the stable connection is not easy to loosen. Note:Most HDMIs have different wiring schemes. Wiring diagrams vary by manufacturer. Our wiring diagrams are shown in application diagrams and are generally for reference only. Considering that HDMI 2.0 has many nodes, it is recommended to use a multimeter to measure the connection. It is suitable for TV computers, projectors, monitors, set-top boxes and other equipment with HDMI signals. It can be connected without soldering lines. Package Contents: 2 x HDMI2.0 Screw Terminal Adapter 1 x Slotted Screwdriver 2 x Clamp Endpipe Kit (5mm 7mm 9mm 10mm hole diameter)