Wengart Heating Thermostats LED Screen WG808 Touch Button AC230V 10A for Radiant Floor Heating Energy Saving and Easy to Operate BLACK

• This floor heating thermostat is compatible with water floor heating systems, embedded installation, Output AC230V 10A, giving you the control you need to save money and energy and maximize comfort.
• The room thermostat adopts touch buttons with buzzer feedback, and the temperature range can be set from 5-95°C. After power-on, you can set the temperature you need without any other operations. It is suitable for people who do not need complex functions.
• The room thermostat has a temperature calibration function, and when the measured temperature differs greatly from the actual room temperature, it can be calibrated by 1°C
• The room thermostat has a backlight display, and it will automatically darken after 30s of no operation, which is convenient for setting the thermostat in a dark environment.
• The room thermostat can freely choose built-in sensor or external sensor, when using external sensor, it is suitable for 3950, 10K=25°C sensor
• The room thermostat has a power-off memory function, and the information can be saved in case of power-off after parameter setting.
• The room thermostat has an anti-freezing function. In the off state, if the measured indoor temperature is lower than 5°C (1-5°C can be set), the heating will be turned on automatically to prevent the water pipe from freezing.
• The room thermostat has the function of starting temperature difference, and the starting temperature difference can be adjusted between 1-5°C. For example, if the set temperature is 20°C and the starting temperature difference is 1°C, the thermostat will turn off the heating when the room temperature is 21°C and above, and turn on the heating when the room temperature is 19°C and below.
• The room thermostat can choose to control the normally open or normally closed electric heating actuator, and it can be connected to the corresponding port as needed.

Wengart Heating thermostat with touch button has a stylish appearance, one-sided design, anti-scratch. Control the thermostat by a large touch button. The thermostat is recommended for controlling the on/off valve actuator in hydronic underfloor heating. Manual or power saving operation mode can be selected via dip switch. For the control of hot water (floor) heating systems used in commercial buildings, residential buildings, light industrial buildings Specification: Voltage: AC 230V 50/60Hz Ambient temperature display accuracy: ±1℃ Temperature control accuracy: ±1℃ Power consumption: 2 W Maximum resistive load: 10A Display: LED; Adjustment range: 5~35℃ Ambient temperature: -5~50℃ Sensor: internal/external NTC sensor Package Included: 1 x Thermostat, 2 x Screws, 1 x Manual Dimensions: 86mm x 86mm x 39mm; Shell material: PC+ABS Protection housing: IP20 Note: 1. Due to the different monitor and light effects, the actual colour of the item of the item may be slightly different from the colour shown in the pictures. Thank you! 2. Please allow for a 1-3 cm margin of error due to manual measurement