Tedeligo Wireless Light Switch Kit,Easy to Install, with Independent Base Wall Switch,2300W Receiver 330ft Long Range Remote ON Off for Home Appliances, AC220V 230V 240V

• ◤Flexible usage and save money◥: 20 switches can control 1 receiver. Simply install the receiver between the device (the device that needs to be controlled) and the power supply (the neutral wire is required). Outdoors 100 meters, indoors 60 meters control distance.The remote control panel can instantly Remote on/off the device from anywhere. Can be used to renovate a home or replace an existing switch without removing walls and laying cables.
• ◤Control at any place◥ :The wall switch can be separated from the wall switch base .The package is equipped with double-sided tape and screws. You can use double-sided or screws tape to fix wall panel base on glass or wall or refrigerator surfaces, etc.
• ◤The high-frequency chip◥ : keep the switch and wireless switch in a stable wireless connection state all the time. The open and stable connection distance is: 230 feet. The performance is stable and reliable, and the receiving sensitivity is high. Signals can travel through walls, floors, doors, panels, etc.
• ◤High quality relay ◥: Compatible with , incandescent, fluorescent, LED, ceiling fans, Coffee machine, fish tank equipment ,electronics or appliances. Max Integrated power: 2200w. suited to comfortably control your garden house, garage ,home,and outside lighting etc.
• ◤Programmable and Expandable◥:Easy to pair and program, this remote control kit is expandable by adding additional receivers and switches, combining freely according to needs, control multiple devices with one switch or control one device with multiple switches.

1.Q:How to wire? A: Only just put the live wire and the neutral wire connect to the Receiver Input port ,then the output port connet the live wire and the neutral wire to the appliance. 2:Q:How long will the batteries of the remote control last? How to replace? A: The original battery of the remote control can be pressed 3000 times. After the red LED of the remote control does not light up, just open the remote control and replace 1 27A 12V battery. Receiver Specification: Encoding Type: Intelligent Learning Code 1527 Modulation Mode:ASK Input Voltage ：85V to 250V RF Frequency: 433MHz Input Voltage: AC 85V~240V Max current:10 Amp Wired Connection Way: Fixed Wiring Pillar Output Terminal: L /N L : Living line N : Neutral line Size:3.2*1.6*1in(81*41*25mm) Color: White (Outside Shell) --Screw: Include Wall switch Specification: -RF frequency : 433MHz --Support encoding : 1527 Leaning code --Battery: 27A 12V( Have Battery include ) --Screw: Include --double-sided tape: Include --Switch base: Include Clear the signal: Only one step :Press the learning button(on the Receiver) 8 times. Match signal: Press the learning button on the Receiver Two times, Wait for two seconds, then Press the button on the wall switch,the LED on the receiver board will flash,succeed. Package: 1X Wall switch(Battery included) 1X Switch base 1X Receiver(With cover) 2X Screw 1X double-sided tape 1X Manual