Heavy Duty Flood & Sewage Water Pond Drain Septic Sump Cesspool Grinding Pump with 30m FIRE Hose (Float Switch)

• Submersible Sewage Dirty Water Drain Septic Sump Cesspool Pump with Grinder/Shredder. WITH FLOAT SWITCH
• Technical parameters: Cast Iron motor body with cast iron impeller which acts as a grinder / breaker Float Switch Electric induction engine Input: 220V - 240V / 50Hz Max. flow : 18000 L / h
• Max. length of suction - 200m Max. depth of suction: 11m Cast Iron Hermetic casing (fully submersible) Weight : 15 kg Height : 44cm Diameter with outlet nozzle: 28 cm 3 x Connectors/ hose adapters included: 2”(52 mm), 1,5"(38 mm), 1"(25 mm) Power cord length - 10m
• Automatic external thermal protection, which protects against overheating of the motor and disconnects the pump when the turbine is blocked. After unblocking the turbine and reaching the appropriate temperature, the pump will restart automatically. Thermal protection switches off the pump when overheated however this is a submersible pump so it should be always fully submersed when it's operating.
• THE COLOUR OF THE PUMP YOU WILL RECEIVE CAN BE GREEN, BLACK, RED OR BLUE.

Submersible Sewage Dirty Water Drain Septic Sump Cesspool Pump with Grinder/Shredder. WITH FLOAT SWITCH 20M OR 30M FIRE HOSE INCLUDED (PLEASE CHOOSE FROM THE OPTIONS) Submersible sewage and dirty water pump, with grinder used mainly for emptying of cesspit's, septic tanks or flooded rooms, pumping of water from lakes and ponds. The pump is equipped with the float switch so it can be controlled automatically. The float switch works by simply turning the pump on when the water level goes up and turning it off when the level goes down. The pump is also equipped with an iron impeller (rotor disc) which acts as a rotor. This makes it easier for the pump to remove contaminants from the liquid. The task of the rotor is to break up and pump dirt. This solution ensures that too much dirt in the network is not allowed to pass through and the pump is not clogged. Technical parameters: Cast Iron motor body with cast iron impeller which acts as a grinder / breaker Float Switch Electric induction engine Input: 220V - 240V / 50Hz Max. flow : 18000 L / h Max. length of suction - 200m Max. depth of suction: 11m Cast Iron Hermetic casing (fully submersible) Weight : 15 kg Height : 44cm Diameter with outlet nozzle: 28 cm 3 x Connectors/ hose adapters included: 2”(52 mm), 1,5"(38 mm), 1"(25 mm) Power cord length - 10m Automatic external thermal protection, which protects against overheating of the motor and disconnects the pump when the turbine is blocked. After unblocking the turbine and reaching the appropriate temperature, the pump will restart automatically. Thermal protection switches off the pump when overheated however this is a submersible pump so it should be always fully submersed when it's operating.