LTP Stone Oil - Oil Based Impregnating Sealer for Interior & Exterior Stone (5L)

• ✅ Oil Based Impregnating Sealer (Listing is for 5Litre Tin)- For Interior & Exterior use. Good for Garden Wood Furniture too.
• ✅ For travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick and external paving.
• ✅ Offers good mechanical strength once cured. A good Slate Oil which will bring out the best in slate tiles.
• ✅ Strongly enhances the appearance. Ideal for low porosity stone & terracotta
• ✅ Easy to apply oil based impregnating sealer ideal for low porosity slate, stone & terracotta.
• ✅ Aids to enhance Black Limestone. Used to come in 250ml at ASIN;B08JXTX8TC and 500ml at ASIN;B07DFG8CSR but both are being discontinued by LTP.

LTP STONE OIL - 5L Listing is for 1 x 5Lit Tin. Also available in 1L, - B00AESGAT8 An Oil Based Impregnating Sealer For Interior & Exterior use For Garden Wood Furniture, travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick and external paving and blackstone. Easy to apply oil based impregnating sealer ideal for low porosity stone & terracotta. Offers good mechanical strength once cured. Directions for use; Shake well. Surfaces should be completely clean & dry . Apply sparingly using a soft cloth, paint brush or LTP sealant applicator pad (Amazon Asin; B00H1QPZWE) to the surface. Remove unabsorbed excess within 1 hour. Porous surfaces may require more than one application. Leave to cure for a minimum of 24 hours before allowing traffic. Keep as dry as possible for the first 3 days. External surfaces: no further treatment necessary. Always try a small inconspicuous area before proceeding with the main area. For application and cleaning tools see LTP Cleaning and Application Kits on Amazon - LTP/SA/1 (LTP Sealer Applicator Pack 1)Asin; B08GL935M2 Internal surfaces: can be finished with LTP Colour Intensifier or LTP Clear or Antique Wax or LTP Ironwax Satin or Gloss. Important: Used cloths should be burnt as they may spontaneously combust. Allow good ventilation during application. Avoid working in direct sunlight; rapid oxidization may inhibit effectiveness. Excess sealer that is left to dry on the surface can be removed with white spirit. Coverage; Lower porosity floors (250ml per 5 sqm) per 10 sq m approximately 1 litre Medium porosity floors (250ml per 2 sq m) per 10 sq m approximately 2 litres.Aftercare Interior surfaces finished with LTP Ironwax Satin or Gloss, use LTP Floorshine . Surfaces finished with LTP Stone Oil, Colour Intensifier, Clear or Antique wax use LTP Waxwash. For SDS or TDS visit LTP website.