ckpsms brand - 1SET #KP-123 Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment (Tape Size 15/16"=24MM)

• IMPORTANT FIT NOTE: Please confirm your machine table has two mounting holes and enough installation space near the needle plate before purchase.
• COMPATIBLE WITH/REPLACEMENT FOR JUKI BRAND SINGLE-NEEDLE MACHINES: Compatible with/Replacement for JUKI brand lockstitch and industrial sewing machines with two attachment mounting holes near the needle plate. Compatible with/Replacement for JUKI brand DDL Series(including but not limited to): DDL-127, DDL-227, DDL-500, DDL-501, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-5550N, DDL-8100, DDL-8300, DDL-8500, DDL-8700, DDL-8700-7, DDL-9000, DDL-9000A, DDL-9000B, DDL-9000C; Compatible with/Replacement for JUKI brand TL Series: TL-15, TL-18QVP, TL-98E, TL-98P, TL-98Q, TL-98QE, TL-2000Qi, TL-2010Q, TL-2020PE, TL-2300Q.
• COMPATIBLE WITH/REPLACEMENT FOR BROTHER BRAND MODELS: Designed for many industrial and semi-industrial sewing machines when the machine table allows proper binder installation. Compatible with/Replacement for Brother brand DB2-B Series(including but not limited to): DB2-B705, DB2-B706, DB2-B707, DB2-B710, DB2-B714, DB2-B715, DB2-B716, DB2-B730, DB2-B735, DB2-B736, DB2-B737, DB2-B738, DB2-B745, DB2-B746, DB2-B747, DB2-B748, DB2-B755, DB2-B757, DB2-B758, DB2-B767, DB2-B772, DB2-B774, DB2-B777, DB2-B778, DB2-B781.
• COMPATIBLE WITH/REPLACEMENT FOR BERNINA BRAND MODELS: Designed for many industrial and semi-industrial sewing machines when the machine table allows proper binder installation. Compatible with/Replacement for Bernina brand B Series: B330, B335, B530, B570, B580, B590, B740.
• CHOOSE BY TAPE SIZE / INLET SIZE: Select by the binding tape width before it enters the binder. Finished binding width is approx. 1/4 of tape cut size. Available tape cut sizes include 3/4”, 7/8”, 15/16”, 1”, 1-3/32”, 1-3/16”, 1-1/4”, 1-21/64”, 1-13/32”, 1-1/2”, 1-9/16”, 1-3/4”, and 2”; metric sizes include 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 45mm, and 50mm.
• IMPORTANT TIPS BEFORE USE: Machine table must have two mounting holes Make sure there is enough space near the needle plate Finished binding size is approx. 1/4 of tape cut size Use 45° bias-cut tape for curves and stretch fabrics Use tweezers or a small tool to help feed tape smoothly Adjust binder position for better stitch alignment Always test on scrap fabric before final sewing
• RIGHT ANGLE RAW FINISH BINDER: This plain raw finish wide binder folds tape evenly around fabric edges, creating a professional raw edge finish on both top and bottom sides. Perfect for inserting binding tape, braid, or edge tape for smooth and accurate garment edge finishing. Ideal for creating clean and consistent edge binding on garments, bags, home décor, and other sewing projects.

1.Part number: KP-123 2.Part name: BINDER 3.Material: Steel 4.Quantity: 1SET 5.Size: We carry following binder tape (entrance )sizes. Please select your size depending on your tape or binding size.The finish size is about 1/4 of the tape size！ Tape Cut Size 3/4"=20MM Tape Cut Size 7/8"=22MM Tape Cut Size 15/16"=24MM Tape Cut Size 1"=26MM Tape Cut Size 1-3/32"=28MM Tape Cut Size 1-3/16"=30MM Tape Cut Size 1-1/4"=32MM Tape Cut Size 1-21/64"=34MM Tape Cut Size1-13/32"=36MM Tape Cut Size 1-1/2"=38MM Tape Cut Size 1-9/16"=40MM Tape Cut Size 1-3/4" =45MM Tape Cut Size 2" =50MM 1)PLAIN RAW FINISH WIDE BINDER RIGHT ANGLE FOR SINGLE NEEDLE INDUSTRIAL SEWING MACHINE. 2)This binder folds the tape in half around the fabric and makes RAW finish top and bottom. It is used to insert Tape, Braid, or Binding along the edge of the garment as shown in the diagram. 3)This binder will Compatible with most industrial and home sewing machines with attachment mounting holes in the machine bed including Bernina, Brother,Consew, Gemsy, Juki, Mitsubishi, Rex, Singer, SunStar, Tacsew, Yamata and many more. 6.Important: Please pay attention to the use scenes of this folder in the posted photo of this listing. There should be two screw holes to install this folder on the operation table. In case there is no screw holes or space on the operation table to install this folder, please do NOT buy this folder.