Aces Equine Nylon Webbing Cart Driving Harness Set Two Tone Blue White With Padding (FULL)

• Strong Imported Webbing
• Stainless Steel Fitting
• Light weight
• Padded
• Stylish pipping
• Disclaimer:Images are for reference only. The actual product is supplied with square winkers, which may differ slightly from the round winkers shown in the photos.

Please take the following measurement from your horse as per the picture A: Bridle, from bit ring to bit ring over poll. Subtract 3 inches if measuring from corner of mouth to corner of mouth as bit rings are usually 1-1/2 inches each side. B: Nose Band. Measure all the way around the muzzle about 2 fingers width below the cheek (Tear) bone. C: Brow band. Measure from hour horse’s temple on one side to the temple on the other side. Remember the brow-band measurement comes around his forehead past his ears. The brow band has to include room for the Conchos. F: Girth All the way around the girth (This is where the saddle would go) G: Backstrap. This is the distance from where the harness saddle sits to the dock (top) of the tail. It is the length used for the turn back strap. H: Breast plate. All the way around the girth (This is where the saddle would go) . I: Breaching. Measure from the middle of the flank swirl around the widest part of the rump to the middle of the flank swirl on the other side. This will ensure the breeching is long enough. All measurement are in inches: minimum to maximum for each size FULL A: Bridle 42” to 48” B: Nose Band 24” to 38” C: Brow band 16’’ to 17.5’’ F: Girth 75” to 89” G: Backstrap. 33” to 45” H: Breast plate 48’’ to 54’’ I: Breaching 42’’ to 48’’ COB A: Bridle 38” to 44” B: Nose Band 23” to 26” C: Brow band 15’’ to 16.5’’ F: Girth 65” to 84” G: Backstrap. 32” to 42” H: Breast plate 44’’ to 50’’ I: Breaching 40’’ to 46’’ PONY A: Bridle 36” to 42” B: Nose Band 22” to 25” C: Brow band 14’’ to 15’’ F: Girth 64” to 72” G: Backstrap. 31” to 38” SHETLAND A: Bridle 32” to 36” B: Nose Band 20” to 23” C: Brow band 13’’ to 14’’ F: Girth 54” to 62” G: Backstrap. 24” to 32” H: Breast plate 36’’ to 42’’ I: Breaching 34’’ Disclaimer:Images are for reference only. The actual product is supplied with square winkers, which may differ slightly from the round winkers shown in the photos.