Rennie Tools - 1/8" (3.175mm) Shank Solid Carbide 2 Flute Up Cut Router Bit 1/8" (3.175mm) Cutting Diameter x 22mm Flute. CNC Router Cutter / Spiral Flute Cutter End Mill For Wood MDF PVC Plywood

• Cutting Diameter - 3.175mm (1/8") / Flute Length - 22mm / Shank Diameter - 3.175mm (1/8") / Overall Length - 45mm
• This solid carbide 2 flute up cut router cutter has a sharp cutting edge. The spiral up cut design pulls the chips upwards which gives a very clean finish at the bottom of the cut. As the chips are pulled upwards this can lead to some breakout / chipping at the top of the cut so if this is a concern then we would recommend using a 2 flute down cut router bit instead.
• This spiral router bit can be used in CNC router machines, fixed head routing machines, hand held routers and desktop routers.
• These 2F up cut router cutters are suitable for use on a wide range of materials such as hardwood, softwood, MDF, MFC, Laminate Board, Plywood, Particle Board, Insulation Panels, PVC, solid surface and Acrylic.
• Manufactured from wear resistant micrograin carbide which results in a longer tool life.

Our solid carbide 2 flute up cut router bits have a sharp cutting edge. The spiral up cut design pulls the chips upwards which gives a very clean finish at the bottom of the cut. As the chips are pulled upwards this can lead to some breakout / chipping at the top of the cut so if this is a concern then we would recommend using a 2 flute down cut router bit instead.