2 Pack | 450mm Clip-On LED Shelf Strip Light Kit | Warm White | 4mm Glass Illuminated Kitchen Unit Lighting | Modern Internal Cupboard Cabinet Display

• 450mm Clip On LED Shelf Adapter Light
• A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on luminosity.
• For example, if you have a light rated at 2.6W and you have 3 of them, your total wattage consumption would be 7.8W. To put this simply, your driver’s wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow).
• We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights.
• Our lights pack the punch of a halogen bulb with the life and energy efficiency of an LED. Each light emits a warm white lighting beam. Each bulb will last for over 30,000 hours & on average, will last 16 years, after this period the bulbs will only reduce slightly in brightness & continue to work.

What’s Included: 2x Warm White, 450mm Clip On LED Shelf Adapter Light 1x 3 Port, 8W Driver Technical Specification: Shelf Light Width – 450mm Fits 4mm Thick Shelf Cable Length – 1.5m Light Colour Appearance – Warm White Colour Temperature – 3000 ÷ 3500 Kelvin Wattage – 0.8W (per light) Life of Light – 30,000 hours IP20 Rated – Mist / Steam Proof Driver Voltage input – 240V AC (Mains) Wattage – 8W 3 Way / Port – A maximum of 3 lights can be connected Cable Length – 1m (this cable connects to the mains) How to Install? These lights are designed to be mounted to the back of a glass shelf transforming it into an illuminated shelf. Simply Clip to the back of the LED shelf and run the cable to the supplied driver and then into a mains power source. This can be in the form of a light switch or plug socket. Connecting to the mains is easy, each light has a 1.5m cable that ends in our driver connector. The supplied driver lets you connect multiple lights to a single power source allowing you to control all lights from 1 switch. Alternatively, you still have the option to wire some of them to separate switches (with multiple drivers) or all of them if you wish, this unit is versatile allowing complete control of how it vs installed. Each shelf light is 450mm wide so if you have particularly wide shelves, this product may not be suitable. Please be sure to check that your shelfs are not thicker than 4mm or our adapters will not fit.