FUNSHOWCASE Oval Cabochon Resin Epoxy Silicone Mould Casting Art Crafts Decorations Making

• Assorted size oval or teardrop cabochons resin mould 12 Cavity
• Jewellery making gem resin moulds for keychain, charm, ring, bracelet, hairclip mount, earring, studs making, DIY phone case etc. se with a wide range of edible and non edible materials, such as resin epoxy, uv resin, concrete, plaster, candle, soap, wax, isomalt, fondant. For various of baking or crafting projects, such as jewellery making, wax accents, scrapbooking etc.
• High resoluction transparent so you check the buttom when process project. For resin casting, use a bright LED light helps to see bubbles more easily. Sometimes trapped bubbles come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles.
• Use cotton swab for easy cleaning the extra ( or scissors will be required for triming the finished product ) . Release spray help de-mould for resin projects. For clay projects after baking, you may try to remove the finished product under the running water with soap for easy release. For other food material, such as isomalt, the filled mould may try to place in freezer for a few minutes to avoid distortion when de-moulding.
• Food Grade warranty. Food Grade and Non Food Grade material should use separately. Wash and boil before use, especially for food.

Color_Clear [ transparent so you can check the buttom when process project ] Wash and boil before use, especially for food. Easy to use mould very flexible and non-toxic, and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade. Some material ( such as clay, paste etc. ) may extend a bit when pull out of the mould. Food Grade. Non-toxic. Food Grade and Non Food Grade material should use separately. moulds in our shop can be used for various crafts and creations including: resin casting, candle making, soap making, plaster crafts, candy making, isomalt baking etc, please note mould cavity width within 1cm is not prefect for chocolate use. Some items in our shop are only ok for liquid use ( uv resin, resin epoxy, liquid clay, wex melt etc. ) . Such as bracelet moulds, ring moulds etc. Please email us before purchase if you are not sure about that. For delicate or complicated item, please remove the product from the silicone mould very carefully, at first slightly bend mould from the edges, then easy press on the center of the mould and remove the product. 1) poured in silicone moulds in layers, allowing air bubbles completely escape; 2) to expedite the process of escaping of bubbles and time of solidification of resin, the mould can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mould, filled with resin in the oven. After baking clay / resin in complex or deep moulds remove the finished product under running water with soap. All moulds are reusable.