Fischer DUOTEC 12 Plasterboard Dowels with M6 Hook, Anchor Fixing for High Loads on Panels and Plates, Hole 12 mm, 544598

• Small hole diameter (10.0 mm for duotec version 10 and 12.mm for duotec version 12)
• Two-component tilting element reinforced with fiberglass and collar for high tensile and cutting loads; also thanks to internal metal parts
• No notches in the support area and therefore no weakening of the plasterboard
• Flexible locking device for chipboard and metric screws

P nylon tilting fixture Fischer duotec nylon overhead fixing with hook m6 p Support materials: ul plasterboard gypsum fibre board wood panels, such as OSB panels, chipboard, plywood sheets mdf steel sheets plastic panels p advantages: ul small hole diameter (12 mm) and short tilting element (46 mm) for easy installation in cavita and isolate. and isolate. Two-component fiberglass reinforced tilting element and collar for high tensile and cutting loads. Thanks to internal metal parts. No notches in the support area and therefore no weakening of the plasterboard. Flexible locking device for metric screws. You can screw them and unscrew the screw several times. EASY PRE-ASSEMBLY - The bushing pre-positions the dowel without screw. Li installation speed. Reduced aesthetic impact thanks to the small bushing. Millimeter lower band can be used as a hole probe. Several parallel fixing points with reduced distance possible. P applications: living room cabinets shelves cabinets handrails them mirrors them chandeliers lamps and ceiling lights emergency lights electric ducts collars tubes smoke probes operation: ul Fischer duotec fixings are suitable for non-passing installations. Easy installation using a standard tip: only diameter 12 mm for Fischer duotec 12. The tilting element of the fastening automatically rotates behind the panel ensuring correct positioning. Fixing and; also suitable for walls insulated with mineral wool. The fixing is also suitable for non-insulated gaps with a thickness of more than 50 mm for Fischer duotec 12 coated with panels from 9.5 mm. The flexible stainless steel locking device allows you to use metric m6 screws for the Duotec 12 versions. Specifications: ul panel thickness max [mm]: 30; li cavity depth min - a - [mm]: 50; panel thickness min [mm]: 9, 5; screw diameter - d sub s/sub - [mm]: m6; screw length - l sub s/sub - [mm]: 82; hole diameter - - [mm]: 12; li hook opening - o sub h/sub - [mm]: [mm]: mm]: 8; 8; 625.