Musiclily Hot Rail Humbucker Single Coil Sized Pickup 10K for Fender Strat SQ Electric Guitar, Black Body with Black Rails

• Standard Single coil size, but it is Humbucker, you can install in Strat Style guitar and use in any position, NO NEED any pickup cover
• Rail length: 62mm
• Ceramic magnet, DC Resistance:10K, tolerance: 0.5K
• Made of metal alloy, 4 conductors and 4 wires can be splittable
• Package Includes: 1pc humbucker pickup and mounting accessories. Note: Our screws maybe will not fit your usage, please use your own if you can

Thanks Bob and Mike's great reviews: Bob: One coil starts with white and finishes with red, the other starts with green and finishes with black the Red and Green go together and get capped off (tape, shrink wrap, etc Then, connect as I said above and you'll be rocking in no time. For future reference, you can figure this out pretty quickly if you have an old school analog multi-meter. A humbucker is just two single coils stuck together. So, you have start and finish of one single coil and start and finish on the other. Connect finish of one to the start of the other, and you are left with one pair of start-finish. One of those goes to ground, the other is to hot (to your switch in the strat). Of course, it matters which goes to ground or to the switch (it will work either way, but sounds better the right way). To get it really right, you need to ID positive and negative for each wire and that depends on the magnets and the winding. This guy does a decent job of showing you how to use a multi-meter to ring out pretty much any humbucker: http://www.youtube.com/watch?v=7UfxQBhqen8 Mike: Regarding wiring the pickups into the Strat, I used the following diagram from Seyour Duncan with success: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=3stks4_1v_2t_5w