GVS SPR316 Pair of P3 Dust Replacement Filters

• Replacement P3 filters to use with GVS Elipse SPR501/SPR406 Respirators
• Small and lightweight to give added comfort
• Hydro-phobic (water resistant)
• Smaller, thinner and flexible design allows the filter to be easy interchanged

Product Description The ELIPSE P3 R carries the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron. It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry. With P3 filters to offer maximum protection against a wide range of dust particles. Replacement filters available. Directions To insert the filter into the compatible reusable mask, start by gently removing the front cover of the mask. Make sure it is free of dust or debris before use. Align with slot and insert it decision until it clicks into place. Properly sealed there are gaps between remove filter, pull tab removal on the side of the filter. Replace it becomes difficult to breathe and visibly dirty. Safety Warning These replacement filters for P3 dust offer protection against fumes containing various substances including microorganisms, marble, plaster, titanium oxide, soapstone, rock wool, wood, detergents, textile fibers, spices, salt, feed, asbestos, bauxite, charcoal, silica, iron, manganese, lead chromium. They have a shelf life up to 5 years. Read the safety instructions carefully before use, storage or disposal. To replace filter, follow from the manufacturer.