Bond-It Damp Proof Course (DPC) Membrane 100mm X 30 Metre roll - Flexible, Durable, Safe and Clean to Handle Meets BS6515. Embossed to Assist Mortar Adhesion - Cost Effective dpc, Black, DPC100

• DPC is fully BBA Certified ( Conforms to the requirements of BS 6515 and CE Mark to EN 14909 ) Promising a product of the highest available Quality.
• Manufactured in the UK From Recycled and reprocessed products so maintains an enviromentally friendly element in your Build Project.
• All rolls are 30m In length 100% of any air Bubbles completely of pin holes and offers Superior Water resistance compared with the average DPC
• Our specially designed DPC is a proven polythene based masterpiece combining and ensuring 100% reliability against any ingress of damp and giving you full peace of mind for your intended project - Embossed to assist mortar adhesion, Proven performance over many years.

This Damp Proof Course (DPC) is manufactured for both domestic and industrial use within stone, brick and concrete walls for the prevention of rising damp within structures.ï½Being made from 100% recycled polythene materials,This DPC provides an environmentally friendly and extremely durable DPC guaranteed to meet British Building Regulations.The DPC is suitable for use inï½both vertical and horizontal applications and comes with an embossed finished for better mortar adhesion.Originally manufactured to conform to BS 6515 The DPC is also compliant and CE Markedï½to BS EN 14909. It is suitable to withstand a compressive load up 2.5N/mm2ï½ provided no lateral load is applied. With superior water resistance compared with the average DPC, The DPC provides a cost efficient, 100% reliable and environmentally friendly solutionposition - Damp Proof Course (DPC) consists of black low-density polyethylene sheet having a mass in the range 0.425kg/mg_ to 0.54kg/m_, formed from a polyethylene polymer of a melt flow rate of five or less when measured according to BS 2782: Method 720A and having a density within the range 0.915 g/mL to 0.925g/mL at 23ï½ C when tested according to method 620A, 620B or 620D of BS 2782: Methods 620A to 620D:1980.When determined as described in Appendix A, the sheet contains a minimum of 2% by mass of evenly dispersed carbon black and shall contain not more than 5% by mass of material other than polyethylene - Finish & Impermeability - The sheet shall be from air bubbles and when tested as described in appendix C, shall have no visible pin holes.Note: A surface texture is permitted - Marking & Packaging - Each roll is labelled with the number and date of the British Standard, BS EN 14909: 2012 - Yuzet DPC is Manufactured by Capital."