zatyorg 151PCS Tile Leveling System Kit 100 Pcs Reusable Tiles Leveler Spacers with 1 Special Wrench, for Construction,Like Building Wall&Floor

151Pcs tile leveling system tile spacer wall leveler wedge spacer floor wall tile tile leveling system Material: PP + stainless steel Quantity: 50 sets/bag + 1 tool + 100pcs gasket Applicable gasket: 2mm-8mm gasket Tile thickness: 5mm-20mm Color: as shown Feature: ●Abrasion resistant and recoverable. ●Easy to carry out DIY operation. ●Keep the tile balance in the same horizontal position. ●Improve tile installation speed. ●Reduce the fatigue/stress of the installer. ●Almost no slippery, flat surface. ●Reduce the need for grinding and polishing. ● Prevent the tiles from moving during the curing process. Use suggestions: 1. Lay the first tile, leaving a distance of more than 2mm (used with cross spacers). Close to the tiles. 2. Insert the T-shaped needle along the tile gap. 3. Rotate again by 180 degrees to clamp the T-shaped needle at the bottom of the two tiles. 4. Use your hand/special wrench to adjust the cover until both tiles are on the same level. 5. About 5-6 hours after leveling, before the cement/adhesive is completely dry, rotate the cap in the opposite direction and remove the 180° T-shaped needle until the words are taken out. Package Included: 1.50 X tile gasket 2. 1 X tool 3.100 X Tile Flattening Gasket Notes: 1. Due to manual measurement, please allow 1-3cm error, thank you. 2. Due to different displays and lighting effects, the actual color of the item may be slightly different from the color shown on the picture. Thank you