YKUKIZEE 50 PCS M8x60 Heavy Duty Masonry Brick Wall Fixing Screws Bolts Anchors, Plasterboard Coach Bolts with Wall Plugs, Wall Plugs And Screws for Cabinet Installation TV Mount

• PACKAGE INCLUDE: You will receive 50 pcs masonry screws and concrete bolts alongside 50 pcs expansion tubes, a sufficient quantity to meet your installation requirements. The expansion tubes measure 6 cm/2.36 inches in length and 8 mm/0.31 inches in diameter, and the expansion screws measure 5.65 cm/2.22 inches in length and 6 mm/0.23 inches in diameter
• MATERIAL: Plasterboard coach bolts with wall plugs are made of steel, offering rustproof and corrosion-resistant properties. The expansion plugs are made of nylon, providing high load-bearing capacity and resistance to breakage
• STABLE FIXATION: Wall plugs and screws feature a four-sided design for stable and secure installation. When used in conjunction with expansion tubes, they enhance the holding power for heavy-duty fixtures
• EASY TO INSTALL: Simply mark the appropriate location, drill a hole slightly longer than the expansion anchor using the correct drill bit, insert the expansion anchor into the hole, screw the bolt into the anchor, tighten it securely, and you're done. It is advisable to wait 24 hours after installation before placing heavy objects on the fixture
• WIDE USGE: TV bracket bolts are suitable for securing objects to concrete and brick walls, providing reliable support for television brackets, curtains, water heaters, cabinets, air conditioning bracket shelves, radiators, and curtain rails

Product description: 50 PCS M8x60 Heavy Duty Masonry Brick Wall Fixing Screws Bolts Anchors, Plasterboard Coach Bolts with Wall Plugs, Wall Plugs And Screws for Cabinet Installation TV Mount Feature: - Sturdy, Durability - Waterproof, Wear-Resistant - Not Easy To Rust, Break - Heavy Duty Wall Anchor Bolts - Good Bearing Capacity - Easy To Use Specification: Material: carbon steel and Expansion Tube Size: 60 x8 mm/2.36 x 0.31inch(L x D) Expansion Screw Size: 5.65 x 6 cm/2.22 x 0.23 inches Installation instructions: 1.Drill a suitable hole in the wall 2. Clean the sand in the hole 3. Insert the expansion bolt into the hole 4. Tighten the hexagon nut outside the wall hole with the tool Notes: 1. Please notice the depth and diameter of the hole before installation. The depth and diameter of the hole is determined by the thickness and weight of what you are hanging 2. Air bricks, foam concrete blocks are not suitable for these expansion bolts 3.Due to manual measurement, there may be an error of about 1-3 mm 4.After installation, please do not place heavy objects immediately. It is recommended to wait for 24 hours before placing heavy objects Package included: 50 pcs Masonry Screws And Concrete Bolts 50 pcs Expansion Tubes