Wykamol Enviroseal Silicone Based Water Repellent/Penetrating Damp Treatment 25L

• For dense masonry walls use water repellent at the rate of 4-5m2 / litre / coat
• For water-proofing porous brick use repellent at the rate of 2-3m2 / litre / coat
• High Performance Water Repellent
• For the treatment of penetrating damp
• FOR TECHNICAL ADVICE PLEASE CALL 01355 222777

A penetrating damp treatment and water repellent on a silicone / siloxane base. Apply liberally to buildings facade by brush, roller or spray to prevent water and damp from penetrating through external brick, block or stone walls. Enviroseal penetrating damp treatment does not form an impervious damp proof membrane. It simply provides a water repellents ilicone resin lining to masonry capillaries to repel water whilst allowing brick and stone to breathe. For porous brickwork spray a second flood coat whilst the walls are still wet from the first. For dense brick walls use brick water repellent at the rate of 4-5m2 / litre / coat. Whilst to damp proof porous brickwork treatment should be at the rate of 2-3m2 / litre / coat To apply Environseal penetrating damp treatment and water repellent to brick & masonry walls you will need a brush, spray unit. and protective workwear. WHERE APPEARANCE IS CRITICAL, A SMALL TEST AREA SHOULD BE APPLIED.