Wtirey Fixative Spray for Art, Clear Acrylic Sealer and Spray Varnish for Acrylic Painting, Pastel Fixative Sp/ray for Pencil Charcoal and Pastel Drawings, 100ml

• FIXATIVE SPRAY FOR PENCIL, CHARCOAL, AND PASTEL: This clear spray is designed to help hold pencil, charcoal, and pastel particles in place on paper. It reduces smudging and loss of detail during handling or framing. For best results, apply in thin, even coats outdoors or in a well-ventilated area
• ALSO WORKS AS A SPRAY VARNISH FOR ACRYLIC PAINTING: The same spray can be used as a final varnish on dry acrylic paintings. It creates a clear, matte or glossy layer over the paint surface. Allow acrylic paintings to dry completely (at least 24–48 hours) before applying
• APPLIES EVENLY WITH A PRESS-TYPE NOZZLE: The nozzle produces a fine mist that covers the artwork evenly without large droplets. Hold the can 20–30cm away from the surface. Spray in short bursts while moving your arm side to side to avoid pooling
• DRIES QUICKLY FOR MULTIPLE COATS: The spray dries to the touch within 10–15 minutes under normal room conditions. This allows you to apply 2–3 thin coats rather than one thick coat, which helps prevent drips or uneven texture. Wait at least 15 minutes between coats
• COMPACT 100ML SIZE FOR STUDIO AND TRAVEL: The small bottle fits easily in an art supply bag or backpack. It is suitable for protecting sketches, finished drawings, and small paintings. One 100ml can typically covers 5–10 A4-sized sheets, depending on the number of coats applied

Features: This 100ml fixative spray helps protect pencil, charcoal, and pastel drawings from smudging. It can also be used as a clear varnish for acrylic paintings. The press-type nozzle provides even application. How to Use: 1.Shake the can well for 30 seconds before use. 2.Work outdoors or in a well-ventilated area. Cover surrounding surfaces with newspaper. 3.Hold the can 20–30cm away from the artwork. 4.Spray in light, even sweeps from left to right, overlapping each pass slightly. 5.Apply 2–3 thin coats, allowing 10–15 minutes drying time between coats. 6.Do not overspray – too much liquid can cause paper to buckle.