Model aeroplane wooden propeller, 138 mm long, for slow flyers, to build yourself from wood, not suitable for flying, for stationary models, plywood propeller, model aeroplane accessories

• ✅ [plywood propeller for stationary models - to build yourself] depending on your preference, the wooden propeller can be permanently installed or simply attached - suitable for most small aircraft such as slow flyers.
• ✅ [wooden propeller with approx. 138 mm long - individually mouldable] suitable for our slow flyer models such as fokker e.iii, etrich taube, blériot xi, sopwith camel, avro 504k, humming bird, fokker dr.1, p-26 a, p-51d, raf se5a.
• ✅ [the entire propeller set is sufficient for up to two wooden propellers] with the right tools such as a file, sandpaper, glue and a little dexterity, up to two propellers can be built from the propeller parts.
• ✅ [propeller with approx. 0.8 to 1 gram] either water-based or oil-based paint can be used to paint the wooden propeller.
• ✅ [scope of delivery] 1 x wooden propeller set, made of plywood, to build yourself, sufficient wooden blades for up to two air screws, kit with 12 x micro screw, propeller only for stationary models.

Do you want to make your slow flyer model look even more realistic? Then you've found the right accessory for your propeller here! Wooden model aircraft propeller, 138 mm long, for slow flyers, to build yourself from wood, not airworthy, for stationary models, plywood propeller, model aircraft accessories, model aircraft engine propeller To make the slow flyer look even better in the display case, here is the matching wooden propeller kit. There are enough wooden propeller moulds in the propeller kit to build up to two wooden propellers. Building instructions for the propeller: - Step 1: Place the wooden propeller parts on top of each other and glue them together. - Step 2: Use a fine rasp and shape the propeller. - Step 3: Use sandpaper from coarse to fine for fine sanding. - Step 4: Treat the wood with coloured glaze. - Step 5: Fit the micro screws and use with our Slow Flyer motor kit, for example. - Attention! Important! The propeller is not suitable for flying. Details of the wooden propeller (after construction): - Total length: 138 mm / 5.43" - Weight: 0.7 to 1.2 grams depending on the design Suitable for our Slow Flyer models: - Fokker E.III - Etrich Taube - Blériot XI - Sopwith Camel - Avro 504k - Fokker DR.1 - Humming Bird - P-51D Mustang - RAF SE5a Not suitable for our Slow Flyer models: - P-26 A Peashooter - A6M2 Zero Fighter The following is included in the scope of delivery: - 1 x wooden propeller set, made of plywood, to build yourself, sufficient wooden blades for up to two air screws, kit with 12 x micro screw, propeller only for stationary models, not for flight operation