WooDeeDoo Interior Wood Varnish | Clear | Gloss | 2L | Quick Drying Wood Sealer | Protection Against Scratches, Spills, Scuffs, and Marks

• Woodeedoo clear varnish protects the surface of all interior wood. Offers a quick drying time of about 20 minutes. Highly resistant to wear, scuff, marks and scratches. A perfect sealer for previously treated surfaces with water-based wood stain/dye.
• Indoor use, clear, non-yellowing gloss finish, suitable for both softwoods and hardwoods, high protection against scratches, spills, scuffs, and marks.
• Safe & eco-friendly (does not contain harmful substances), easy to apply, a low odour that lasts up to several days until complete evaporation
• Recommended for varnishing the following wooden products: furniture, doors, windowsills, storage boxes, and other wooden elements.
• Coverage: 10-12 sqm per litre (first coat); 15-18 sqm per litre (second & third coat); efficiency depends on the type of wood and the application method. No of coats: minimum coats 2, recommended 3. Ready for second coat in two hours.

Woodeedoo Wood Varnish | Clear | Matt A perfect sealer for previously treated surfaces with water-based wood stain/dye. Coverage: 10-12 sqm per litre (first coat); 15-18 sqm per litre (second & third coat); efficiency depends on the type of wood and the application method. No of coats: minimum coats 2, recommended 3 Drying time: 20 minutes, ready for a second coat in two hours Features: Clear, non-yellowing matt finish, suitable for both softwoods and hardwoods, high protection against scratches, spills, scuffs, and marks, nourishes the grain pattern, offers long-lasting protection, indoor use, non-toxic, safe & eco-friendly (does not contain harmful substances), easy to apply a low odour that lasts up to several days until complete evaporation Recommended for: furniture, doors, windowsills, wooden boxes, other decorative elements How to use: Shake well before use. Do not dilute. Ensure the wooden surfaces are clean, dry, dust and resins-free. It is best to apply on wood without previous primers. Previous coats of paint or varnish must be removed back to bare wood. The temperature of the substrate, environment and coloured elements during the work should be between +5 ºC and +25 ºC. The varnish should be applied in thin layers with a brush or roller, rubbing the preparation evenly along the wood grain over the largest possible surface. Wipe off any excess with a clean, lint-free cloth. Before applying the final coat, the varnished surface should be slightly matted with sandpaper (paper gradation 220 - 240). Total curing time approx. 3 - 5 days (depending on ambient conditions). Warranty: 12 months (in sealed containers)