WEILAOK Laser Marking Fluid, Laser Marking Powder Suitable for Laser Engraving of Various Metals, Fast Drying Speed, High Whiteness, 150ML

• Professional Quality: Laser Marking Powder is specially designed for metal surface marking and engraving. The high-quality formula effectively shields the oxide layer and scratches, and there will be no burrs after laser engraving
• Easy Operation: Equipped with a special sponge brush, dip and use, even coating saves time and effort. No professional skills or equipment are required, one person can quickly complete the pretreatment, greatly shorten the marking cycle, and improve production efficiency
• Stable and Reliable: Low-volatile raw materials are preferred, with stable properties and not easy to ignite. Safe and convenient operation, better use in a ventilated environment. Store in a cool and dark place
• Easy to Clean: The marking process is clean, the residue is easy to clean, and pollution is reduced. Batch performance is stable to ensure reliable and consistent marking effects
• Widely Compatible: Applicable to all kinds of common metals: stainless steel, aluminum alloy and hard alloy as well as acrylic, glass and other materials. One bottle meets the high-quality marking pretreatment needs of various metals

This liquid is specially designed to improve the metal laser marking effect. After application, it changes the metal surface's absorption and reaction to laser energy, significantly enhances the marking contrast and clarity, and can etch permanent fine graphics on stainless steel, aluminum, copper and other metals. Product name: WEILAOK Laser Marking Fluid Product specifications: 150ml Main function: Used to cover the surface of the substrate before laser engraving, facilitating laser engraving or marking Solid content (%): 61.0±1.0 Viscosity: 24000±2000 PH value: 8.0±1.0 Usage steps: 1. Please mix this product evenly before use; 2. Remove impurities and dust on the surface of the substrate; 3. Use a sponge brush to evenly apply this product on the material surface to ensure that the marking liquid evenly covers the material surface; 4. Wait for about 5-10 minutes to achieve a drying effect, and laser engraving can be performed; 5. After laser engraving, the laser marking liquid can be directly removed with clean water. Notes: 1. It is recommended to apply by brushing. Do not apply too much at one time. Just ensure that the surface of the material is evenly covered. 2. The drying time of this product is affected by factors such as ambient temperature, humidity and ventilation conditions. 3. The number of times this product is applied may vary according to the actual use conditions. 4. Please pay attention to the antifreeze storage of the product in cold areas or under low temperature conditions. The storage temperature must not be lower than 5°C. 5. Avoid sun and rain, pay attention to ventilation, the storage temperature is (5-35°C), prevent extrusion and collision, and stay away from fire and heat sources. * After stirring evenly, the product can be opened and used. The unused material must be sealed and used as soon as possible. Safety warning: 1. This product is for external use and cannot be swallowed 2. Keep away from children