WDragon HIGH GLOSS Black Carbon Fiber Vinyl Wrap Texture 3 layer 5D Vinyl wrap DIY Film (5D Black, 60cm X 1.5M)

• Excellent Adhesiveness Features: removability, high hiding, etc. It is convenient for multiple positioning construction. No adhesive residue after removal.
• Lightweight And Tough: the film thickness is thinner, more flexible, more ductile (any stretching after warming, no shrinkage after returning to normal temperature), it can show ideal tortuousness on a small arc, and it is durable.
• Insulation Corrosion: It can withstand most of petroleum, grease, fuel, fat solvent, weak acid, weak alkali, and weak salt, and protects from continuous damage such as acid rain, sand and bird droppings, and grease.
• Excellent Filter: Refraction, filtering harmful light, blocking glare, UV damage to the paint, to protect the original paint gloss and durability.
• Insulation Flame Retardant: adapt to the temperature difference -40 °C to +90 °C, good thermal insulation and inert thermal conductivity, flame retardant.

Instruction: Suitable for car, motorcycle or small car Use tools: clean rags, doctor blades or credit cards Step 1. Clean the car body's pasting position, conditionally use a cloth without fiber shedding, scrub with 50% alcohol or acetone, or use soapy water; the solvent-cleaned surface needs to be volatilized after the solvent is available. Step 2, under normal circumstances, slowly side of the paste, while using a tool to scrape flat, while exposing the end of paper. Step3, if the car length and width are less than 10 cm, you can tear off all the stickers and then paste. But be careful not to accidentally stick or fall off the floor and get dust. Step4. Use a clean cloth or a scraper [such as a telephone card or a credit card] to repeatedly rub or scrape the film repeatedly until there is no bubble in the car. Notes: It is recommended not to expose to sunlight or wash the car within 24 hours.