WAVE Chlorine Granules for Hot Tub Spa and Swimming Pool Water Treatment for Rapid Disinfecting and Cleaning, 5 kg

• DISINFECT POOL AND HOT TUB WATER: with these stabilised chlorine granules - free active chlorine (FAC) to maintain a healthy swimming environment
• KILL BACTERIA AND ELIMINATE HARMFUL ORGANISMS: so your spa or pool water stays hygienic and healthy
• FAST DISSOLVING GRANULES: get to work instantly - no more waiting around for hours for tablets to dissolve
• STABILISE CHLORINE LEVELS: to help ensure your water chlorine level stays between 1-3 mg/litre (ppm) for pools and 3-5 mg/Litre (ppm) for hot tubs
• EASY TO FOLLOW INSTRUCTIONS: included with the granules help you select the correct amount to apply for the desired increase in chlorine level

Product description WAVE Chlorine Granules can be used to disinfect your hot tub, or swimming pool water. Our chlorine granules are completely soluble and are used to stabilise your hot tubs pH levels. They contain a stabilising agent to protect your hot tub against the effectiveness of chlorine in the water when exposed to sunlight, making the granules ideal for daily chlorination. Guidance; How much chlorine to add: A heaped teaspoon holds approximately 8g of chlorine granules. As a general guide, to increase a 1500L hot tub from 0ppm to 5ppm you will need to add at least 12g of Chlorine Granules. So approximately one and a half teaspoons should be enough. How to add to your hot tub: Add your chlorine granules in stages (8-12g) into 10 litres of freshwater using a clean plastic container and mix carefully. Slowly pour the mixed solution into your hot tub water near to the return inlets, then thoroughly rinse out the container. Dosage Heavily used hot tubs, maintained at high temperatures, may require more frequent dosing with Chlorine. Individual requirements may vary, test using a poolside test kit and adjust the dose rate as necessary to maintain a chlorine level of 1-3 ppm or mg/litre. pH Control To keep your hot tub at the optimum pH level, the water should be maintained at a pH level of around 7.4 and between 7.2 and 7.8 at all times. If the hot tub is too alkaline (8.0+) the efficiency of the chlorine is around 20%. If the pH level is too high you could damage your hot tub and swimsuit, it is vital to check the pH level of your hot tub before use using a simple pH testing strip. IF INHALED: Place the person into the fresh air and keep them comfortable, monitor their breathing. Call A&E or your doctor if you feel unwell. If eye irritation persists, seek medical advice immediately. If chlorine comes into contact with acid, it will give off a toxic gas. Wear safety goggles when mixing chlorine and water to avoid any splashes into the eye area. Directions Dissolve the chlorine granules in water and add the solution to your swimming pool or spa for daily dosing, maintaining a clean and sanitized environment.