Waterway Hot Tub Spa Jet Diffusers Mini Storm 218-6930 - Pack of 10

• Sold by Pool and Spa Center Official Reseller of Waterway Products
• MPN: 218 6930
• Mini Storm
• The diffuser is the white plastic rear part of the water jet
• Set of 10 diffusers

Dimensions: Manufacturer Part Number: 218-6930 - Storm Mini Diffusers Length (cm): 8.5 Width (cm): 4.5 Internal Diameter (cm): 4.3 Instructions: Please note that these instructions are for information purposes only, we cannot accept any liability for their accuracy. Boil some water in a saucepan. Place the old jet face on a towel on a flat surface ready for the following downward pressure. Make sure you have identified how the diffuser sits on the jet - it only clips into one position. Place the diffuser (just the first 1-2mm of the plastic) in the cooking water for about a second and then immediately offer it to the old jet face and then apply equal downward pressure. Important: With regards to Powerstorm diffusers, depending on how old your jet is you may find that the lip on your existing jet face is too large to fit into the newly designed diffuser slot and so you may need to carefully trim this lip to fit or alternatively replace the entire jet. Ideal for: Please be aware that we list these names for reference, you just need to check the part numbers and design before ordering as many spa companies have changed between jet manufacturers over the years and we are not responsible for the accuracy of this list. Alp Spa, Beachcomber, Caldera, Catalina, Canadian Spa, Coyote Spa, Elite Spa, Emerald Spa, Gulf Coast, Master Spas, Spa Crest & Spaform and many more brands.