Watering Stakes Automatic Watering System, Plant Self Drip Irrigation Slow Release for Indoor or Outdoor Houseplants (8)

• Useful tool: when you are on vacation, on a business trip, or forgetting to water plants, the automatic watering probe is a simple and effective way to water plants; Remember to follow the steps of use!
• Application: the 8 pack watering stakes are suitable for most automatic garden watering devices; They are good for seeding, planting without pollution; And they will slow to release water into the pot as the plants need
• Measurement: connect tube is 78 cm/ 30.7 inches in length, the root get water directly by itself to achieve water drip irrigation
• Kind reminder: the watering pile is suitable for watering any indoor plant; To speed up the water flow, raise the pot; To slow down the water flow, lower it; Please note that the looseness of the soil, water absorption, and reservoir water level affect infiltration; The higher the water level in the reservoir, the faster the infiltration; Please adjust the water level according to your actual usage to achieve satisfactory results
• Usage: 1. Soak the ceramic cone and tube in water for 15 minutes, then fill the ceramic cone with water. 2. Fill the water pipe with water and discharge the air from the pipe. 3. When underwater, tighten the top and insert the ceramic cone into the soil. 4. Put the water pipe into the water bottle, which should be higher than the potted plant. 5. Confirm that there is water flowing into the ceramic cone in the pipe

Product description Specifications: Color: as pictures shown Material: PVC, PE, ceramic Length: 4.4 inches/ 11 cm Diameter: 1 inch/ 2.5 cm Tube length: 30.7 inches/ 78 cm Quantity: 8 pack The process of water release: As the soil dries, the ceramic cone delivers water gradually into the surrounding earth; Thereby create a vacuum within the cone which draws water from the nearby container of water; Once the soil is moistened enough, the watering stake will cease flowing water. Operation: 1. Put the earthen part of the product into the water to soak for 15 minutes. 2. Prepare a water container filled with water (a narrow bottle such as mineral water bottle). 3. Make sure the pottery pieces filled with water, because the green plastic cover tightly with the pottery pieces. 4. Insert cone piece a little bit into the soil of plant. 5. Then it will automatically bring water into the other end of the container, and then water your plants. Tips: 1. In order to water better, please keep the bottle watering device below the high end of the green plastic cover. 2. Please note the demand of each plants and pots size, and use the appropriate watering devices. 3. If it fails to water your plants, please repeat the above operation steps. 4. After months of using, the ceramic piece parts need to be cleaned so as not to affect the effect of continue-using. Package includes: 8 x Plant watering devices Safety Warning Follow the provided instructions for proper use to avoid potential hazards such as leaks or improper watering.